In the two-handed tapping styles, bassists use both hands to play notes on the fretboard by rapidly pressing and holding the string to the fret. Instead of plucking or picking the string to create a sound, in this technique, the action of striking the string against the fret or the fretboard creates the sound. Since two hands can be used to play on the fretboard, this makes it possible to play interweaving contrapuntal lines, to simultaneously play a bass line and a simple chord, or play chords and arpeggios. Bassist John Entwistle of The Who tapped percussively on the strings, causing them to strike the fretboard with a twangy sound to create drum-style fills. Players noted for this technique include Cliff Burton, Billy Sheehan, Stuart Hamm, John Myung, Victor Wooten, Les Claypool, Mark King, and Michael Manring. The Chapman Stick and Warr Guitars are string instruments specifically designed to play using two-handed tapping.
The number of frets installed on a bass guitar neck may vary. The original Fender basses had 20 frets, and most bass guitars have between 20 and 24 frets or fret positions. Instruments with between 24 and 36 frets (2 and 3 octaves) also exist. Instruments with more frets are used by bassists who play bass solos, as more frets gives them additional upper range notes. When a bass has a large number of frets, such as a 36 fret instrument, the bass may have a deeper "cutaway" to enable the performer to reach the higher pitches. Like electric guitars, fretted basses typically have markers on the fingerboard and on the side of the neck to assist the player in determining where notes and important harmonic points are. The markers indicate the 3rd, 5th, 7th, 9th fret and 12th fret (the 12th fret being the octave of the open string) and on the octave-up equivalents of the 3rd fret and as many additional positions as an instrument has frets for. Typically, one marker is on the 3rd, 5th, 7th and 9th fret positions and two markers on the 12th fret.
There's a lot to be said for tradition when it comes to the bass guitar, and it's a tradition that ultimately goes back to the originals: the Jazz Bass and Precision Bass. With some stellar options available from Fender and Squier, you're in a good place to get started with those iconic bass guitars. On the other hand, if you'd prefer something a bit more unique, you've got no shortage of options. Over the years, the bass guitar market has grown hugely, and there are now a ton of choices ranging from beginner-friendly instruments like Rogue and Dean models all the way to professional masterpieces from luthiers such as Warwick, Schecter and Rickenbacker.
However, contemporary classical composers may also write for the bass guitar to get its unique sound, and in particular its precise and piercing attack and timbre. For example, Steve Reich, explaining his decision to score 2x5 for two bass guitars, stated that, "[With electric bass guitars] you can have interlocking bass lines, which on an acoustic bass, played pizzicato, would be mud."
Keyboards, on the other hand, were designed to produce a much wider range of sounds than traditional pianos. Though they are sometimes good options for beginners, the range of available features on a keyboard make them more appropriate for intermediate to advanced musicians who are interested and capable of developing their own sound. It’s uncommon for such musicians to use a keyboard to create the same sounds that a traditional piano would make. Keyboards are usually much lighter than digital pianos, and they often do not have weighted keys. In short, keyboards are designed to be used by musicians and producers with more experience. Keyboards are often much lighter than digital pianos and have tones which number in the hundreds and sometimes thousands. They include a lot of technical options to allow the player to fully customize their sound.
When playing bass solos, rock and metal bassists sometimes use effects such as fuzz bass or a wah-wah pedal to produce a more pronounced sound. Notably, Cliff Burton of Metallica used both effects. Due to the lower range of the bass, bass guitar solos usually have a much lighter accompaniment than solos for other instruments. In some cases, the bass guitar solo is unaccompanied, or accompanied only by the drums.
Depending on the individual features of each digital piano, they may include many more instrument sounds other than regular piano samples. Many less expensive or average-priced digital pianos often include basic instruments such as string ensemble, electric piano, organs, harpsichord, guitar, and vibraphone, while a more expensive and advanced digital pianos may have a wider range of instruments such as synthesized sounds, wind instruments, traditional instruments, violins, drums, percussion, and a variety of effects, similar to that of a typical digital keyboard or synthesizer. Some digital pianos may also have a complete set of General MIDI implementation, in addition to the aforementioned basic sounds.
Before buying your first bass guitar, you need to make sure to consider each and every one of the factors above before settling on a specific model you want to buy. As you look at the various models, also make sure that the guitar feels comfortable to you personally as you test it out. Remember, you will be using this bass for a while, so you need to make that sure you are picking the best bass guitar in your budget for you.
If you want to learn to play the piano, digital pianos offer many benefits compared to acoustic grand pianos. Most digital pianos we sell offer split or dual mode. Engaging this feature separates the keyboard into two identical keyboards with the same notes and octave. This allows you to play along with your piano teacher so they can walk you through chords, melodies and full songs. Select models also offer built-in demo songs with step by step instructions on how to play them.
Need Help?Customer Service1firstname.lastname@example.orgMon - Fri 8am - 11pm Eastern TimeSat 9am - 8pm Eastern TimeSun 10am - 8pm Eastern TimeProduct Assistance1email@example.comMon - Fri 8am - 11pm Eastern TimeSat 9am - 8pm Eastern TimeCredit Department1firstname.lastname@example.orgMon - Fri 8am - 8pm Eastern TimeSat 9am - 1pm Eastern TimePayments1email@example.comMon - Fri 8am - 8pm Eastern TimeSat 9am - 1pm Eastern Time
Bass bodies are typically made of wood, although other materials such as graphite (for example, some of the Steinberger designs) and other lightweight composite materials have also been used. While a wide variety of woods are suitable for use in the body, neck, and fretboard of the bass guitar, the most common types of wood used are similar to those used for electric guitars; alder, ash or mahogany for the body, maple for the neck, and rosewood or ebony for the fretboard. While these traditional standards are most common, for tonal or aesthetic reasons luthiers more commonly experiment with different tonewoods on basses than with electric guitars (though this is changing), and rarer woods like walnut and figured maple, as well as exotic woods like bubinga, wenge, koa, and purpleheart, are often used as accent woods in the neck or on the face of mid- to high-priced production basses and on custom-made and boutique instruments.
Maybe you're looking for something a bit more conspicuous, that you can make into the centerpiece of your music room? If so, you'll want to investigate options like the Yamaha Arius YDP-142 and Suzuki Micro Grand Digital Piano. These advanced instruments sound every bit as gorgeous as they look, and they offer the ability to record your and store your performances to listen again later or even to playback as accompaniments.