A sizzler is a metal chain or combination of chains that is hung across a cymbal, creating a distinctive metallic sound when the cymbal is struck similar to that of a sizzle cymbal. Using a sizzler is the non-destructive alternative to drilling holes in a cymbal and putting metal rivets in the holes. Another benefit of using a "sizzler" chain is that the chain can be removed and the cymbal will return to its normal sound (in contrast, a cymbal with rivets would have to have the rivets removed). Some sizzlers feature pivoting arms that allow the chains to be quickly raised from the cymbal, or lowered onto it, allowing the effect to be used for some songs and removed for others.
Our massive selection of acoustic drums and electronic drums, world percussion instruments, drumming accessories, replacement parts, and cymbals all come with our lowest price and total satisfaction guarantees. Browse around and you'll see drums and percussion instruments from Pearl, Tama, Zildjian, Sabian, and more. Looking for a great gift? We've got hand drums including bongo drums and congas, as well as kids drums and electronic drum sets.
Although we might take some flak from guitarists, we bassists know the truth: a band just wouldn't be the same without the deep, rumbling tones of the bass laying the foundation for everyone else. Any instrument can play a memorable tune, but it's up to the bass guitar to really put in the heartbeat and soul that separates a great song from an average one. Naturally, giving a great performance is all about being in touch with your instrument, and for that, you'll want to take a careful look at the basses here to find the one that fits you best.
There are several reasons for this division. When more than one band plays in a single performance, the drum kit is often considered part of the backline (the key rhythm section equipment that stays on stage all night, which often also includes bass amps and a stage piano), and is shared between/among the drummers. Oftentimes, the main "headlining" act will provide the drums, as they are being paid more, possibly have the better gear, and in any case have the prerogative of using their own. Sticks, snare drum and cymbals, and sometimes other components, are commonly swapped though, each drummer bringing their own. The term breakables in this context refers to whatever basic components the "guest" drummer is expected to bring. Similar considerations apply if using a "house kit" (a drum kit owned by the venue, which is rare), even if there is only one band at the performance.
A unique effect can be created by striking an open hi-hat (i.e., in which the two cymbals are apart) and then closing the cymbals with the foot pedal; this effect is widely used in disco and funk. The hi-hat has a similar function to the ride cymbal. The two are rarely played consistently for long periods at the same time, but one or the other is used to keep the faster-moving rhythms (e.g., sixteenth notes) much of the time in a song. The hi-hats are played by the right stick of a right-handed drummer. Changing between ride and hi-hat, or between either and a "leaner" sound with neither, is often used to mark a change from one passage to another, for example; to distinguish between a verse and chorus.
Once the basic parameters were established, I reached out to colleagues who are piano teachers or musical directors to get a sense of what models were in highest rotation in the professional world. I also played several models at the National Association of Music Merchants (NAMM) show in January. From there I searched through Amazon, Musician’s Friend, and Sweetwater for available models, then cross-checked that information with manufacturer websites and added anything that was missing. After considering all that information, I decided to limit the price to $500. That was high enough to include several quality-built keyboards that met all (or most) of the criteria without being too pricey. This gave me a list of 21 models from nine different companies.
Six strings are usually tuned B0–E1–A1–D2–G2–C3—like a four-string bass with an additional low B string and a high C string. Some players prefer B0–E1–A1–D2–F♯2–B2, which preserves the intervals of standard six-string guitar tuning (an octave and a fourth lower) and makes the highest and lowest string the same note two octaves apart. While less common than four or five-string basses, they appear in Latin, jazz, and other genres, as well as in studio work where a session musician's single instrument must be highly versatile, and to facilitate sightreading in the recording studio. Alternative tunings for six-string bass include B–E–A–D–G–B, matching the first five strings of an acoustic or electric guitar with an additional low B, and E–A–D–G–B–E, completely matching the tuning of a six-string guitar but one octave lower allowing the use of guitar chord fingerings. Rarer tunings such as E–A–D–G–C–F and F♯–B–E–A–D–G provide a lower or higher range in a given position while maintaining consistent string intervals. In 1974, Anthony Jackson worked with Carl Thompson to create the Contrabass guitar (BEADGC). Later, Jackson brought his ideas to Fodera and worked with Ken Smith to create a wider-spaced Contrabass guitar, which evolved to the modern six-string bass.
Lunes-Domingo de 9AM a 7PM EST Customize Search Results for Your Location change location SitemapView Our SitemapContact UsBlogBy EmailPlace a Purchase OrderReturn RequestLet Us Help YouFAQsProduct ConditionShipping InformationPayment OptionsOrder VerificationReturnsNotice of AccessibilityAffiliate ProgramJoin Our Affiliate Program Follow zZounds on:
An LCD readout and a few more buttons on the control panel would go a long way toward making the keyboard’s options easier to use. The metronome function especially could be more user friendly. It has 10 speed presets, labeled 0-9, with a + and – for adjustment. These are selectable with the Function button and a key press. While practicing and deciding on tempo, most students find it more beneficial to know the exact BPM (beats per minute), which is impossible here using the built-in metronome.
The bare minimum requirements for a budget digital piano are to have 88 keys (the same number found on traditional acoustic pianos) and internal speakers to facilitate practicing without an amplifier. Beyond that, some amount of weighted key action (either semi-weighted or hammer action, more on this in a moment) and an accurate piano sound were the primary deciding factors for our picks. An included stand and sustain pedal were not requirements, as aftermarket options are readily available and inexpensive. (We discuss some options below.)
However, with the technological advances, recent digital pianos are mostly capable of recreating string resonances, reverberations and other acoustical effects via digital signal processing (DSP) and modeling technology. One example is the Casio Privia, which is able to generate such acoustical effects by means of a simple DSP, which is far less complex than physical modeling.
Just like the acoustic instruments they're derived from, digital pianos come in different sizes. They also offer dozens of options for your perusal, so you can weigh all kinds of factors to find the right model for you. For instance, if you're looking to pack a lot of piano into as small a space as possible, consider instruments such as the Williams Allegro 88-Key Digital Piano or the Casio CDP-120. These are fairly compact pianos, but that doesn't limit the breadth of their samples and sound settings.