CajonsLatin Percussion LP1428NY Black Box CajonSee More CajonsMisc. PercussionRemo Key-Tuned FiberSkyn DjembeSee More Misc. PercussionChildren's Drums and PercussionRemo Kids PercussionSee More Children's Drums and PercussionCongasToca Synergy Conga SetSee More CongasBongosLatin Percussion BongosSee More BongosTambourinesRemo Fiberskyn 3 Pretuned Head TambourineSee More TambourinesSnare DrumsTama SLP G Bubinga Snare DrumSee More Snare DrumsSee All Other Drums and Percussion
Most bass players stand while playing, using a strap over the shoulder to hold the instrument, although sitting is also accepted, particularly in large ensemble settings, such as jazz big bands or in acoustic genres such as folk music. Some bassists, such as Jah Wobble, alternate between standing or seated playing. It is a matter of the player's preference as to which position gives the greatest ease of playing and what a bandleader expects. When sitting, right-handed players can balance the instrument on the right thigh or like classical guitar players, the left. When sitting, no strap is required. Balancing the bass on the left thigh usually positions it in such a way that it mimics the standing position, allowing for less difference between the standing and sitting positions. Balancing the bass on the right thigh provides better access to the neck and fretboard in its entirety, especially the lower-pitched frets.
In general, the sounds produced by a digital piano are based on sampling, by which real piano sound samples are stored in ROM. The samples stored in digital pianos are usually of very precision recording and made using high-quality pianos, expensive microphones, and high-quality preamps in a professional recording studio. ROM may include multiple samples for the same keystroke, attempting to reproduce diversity observed on the real piano, but the number of these recorded alternatives is limited.
A common feature of more expensive basses is "neck-through" construction. Instead of milling the body from a single piece of wood (or "bookmatched" halves) and then attaching the neck into a pocket (so-called "bolt-on" design), neck-through basses are constructed first by assembling the neck, which may comprise one, three, five or more layers of wood in vertical stripes, which are longer than the length of the fretboard. To this elongated neck, the body is attached as two wings, which may also be made up of several layers. The entire bass is then milled and shaped. Neck-through construction advertisements claim this approach provides better sustain and a mellower tone than bolt-on neck construction. While neck-through construction is most common in handmade "boutique" basses, some models of mass-produced basses such as Ibanez's BTB series also have neck-through construction. Bolt-on neck construction does not necessarily imply a cheaply made instrument; virtually all traditional Fender designs still use bolt-on necks, including its high-end instruments costing thousands of dollars, and many boutique luthiers such as Sadowsky build bolt-on basses as well as neck-through instruments.
In the 1950s, Leo Fender, with the help of his employee George Fullerton, developed the first mass-produced electric bass guitar. Fender was the founder of Fender Electric Instrument Manufacturing Company, which made popular brands of electric guitars, basses and amplifiers. Fender's Fender Precision Bass, which began production in October 1951, became a widely copied industry standard for the instrument. The Precision Bass (or "P-bass") evolved from a simple, un-contoured "slab" body design and a single coil pickup similar to that of a Telecaster, to a contoured body design with beveled edges for comfort and a split single coil pickup.
Timbales are tuned much higher than a tom of the same diameter, and normally played with very light, thin, non-tapered sticks. They have relatively thin heads and a very different tone than a tom, but are used by some drummers/percussionists to extend the tom range upwards. Alternatively, they can be fitted with tom heads and tuned as shallow concert toms. Attack timbales and mini timbales are reduced-diameter timbales designed for drum kit usage, the smaller diameter allowing for thicker heads providing the same pitch and head tension. They are recognizable in 2010s genres and in more traditional forms of Latin, reggae & numerous world music styles. Timbales were also used on occasion by Led Zeppelin drummer John Bonham. Gong drums are a rare extension to a drum kit. The single-headed mountable drum appears similar to a bass drum (sizing around 20–24 inches in diameter), but has the same purpose as that of a floor tom. Similarly, most hand drum percussion cannot be played easily or suitably with drum sticks without risking damage to the head and to the bearing edge, which is not protected by a metal drum rim, like a snare or tom. For use in a drum kit, they may be fitted with a metal drum head and played with care, or played by hand.
Optical pickups are another type of non-magnetic pickup. They use an infrared LED to optically track the movement of the string, similar to the mechanism of modern computer mice, which allows them to reproduce low-frequency tones at high volumes without the "hum" or excessive resonance associated with conventional magnetic pickups. Since optical pickups do not pick up high frequencies or percussive sounds well, they are commonly paired with piezoelectric pickups to fill in the missing frequencies. LightWave Systems builds basses with optical pickups.
If a second hanging tom is used, it is 10" diameter and 8" deep for fusion, or 13" diameter and one inch deeper than the 12" diameter tom. Otherwise, a 14" diameter hanging tom is added to the 12", both being 8" deep. In any case, both toms are most often mounted on the bass drum with the smaller of the two next to the hi-hats (on the left for a right-handed drummer). These kits are particularly useful for smaller venues where space is limited, such as coffeehouses and small pubs.
Jump up ^ "Warren 'Baby' Dodds". The Percussive Arts Society. Archived from the original on 27 September 2011. Retrieved 21 November 2011. Dodds' way of playing press rolls ultimately evolved into the standard jazz ride-cymbal pattern. Whereas many drummers would play very short press rolls on the backbeats, Dodds would start his rolls on the backbeats but extend each one to the following beat, providing a smoother time flow.
In some styles or settings, such as country music clubs or churches, small venues, or when a live recording is being made, the drummer may use a transparent perspex or plexiglas drum screen (also known as a drum shield) to dampen the onstage volume of the drums. A screen that completely surrounds the drum kit is known as a drum booth. In live sound applications, drum shields are used so that the audio engineer can have more control over the volume of drums that the audience hears through the PA system mix or to reduce the overall volume of the drums, as a way to reduce the overall volume of the band in the venue. In some recording studios, foam and fabric baffles are used in addition to or in place of clear panels. The drawback with foam/cloth baffle panels is that the drummer cannot see other performers, the record producer or the audio engineer well.
Drum HeadsEvans Black DrumheadSee More Drum HeadsDrum SticksVic Firth American Classic 5A DrumsticksSee More Drum SticksDrum CasesSKB Drum CasesSee More Drum CasesDrum SilencersHQ Percussion Sound Off Drum Mute PackageSee More Drum SilencersDrum BagsProtection Racket Drum BagsSee More Drum BagsPractice PadsDrum Workshop Go Anywhere Practice Pad SetSee More Practice PadsSee All Drum Accessories
The number of frets installed on a bass guitar neck may vary. The original Fender basses had 20 frets, and most bass guitars have between 20 and 24 frets or fret positions. Instruments with between 24 and 36 frets (2 and 3 octaves) also exist. Instruments with more frets are used by bassists who play bass solos, as more frets gives them additional upper range notes. When a bass has a large number of frets, such as a 36 fret instrument, the bass may have a deeper "cutaway" to enable the performer to reach the higher pitches. Like electric guitars, fretted basses typically have markers on the fingerboard and on the side of the neck to assist the player in determining where notes and important harmonic points are. The markers indicate the 3rd, 5th, 7th, 9th fret and 12th fret (the 12th fret being the octave of the open string) and on the octave-up equivalents of the 3rd fret and as many additional positions as an instrument has frets for. Typically, one marker is on the 3rd, 5th, 7th and 9th fret positions and two markers on the 12th fret.
The bass guitarist sometimes breaks out of the strict rhythm section role to perform bass breaks or bass solos. The types of bass lines used for bass breaks or bass solos vary by style. In a rock band, a bass break may consist of the bassist playing a riff or lick during a pause in the song. In some styles of metal, a bass break may consist of "shred guitar"-style tapping on the bass. In a funk or funk rock band, a bass solo may showcase the bassist's percussive slap and pop playing. In genres such as progressive rock, art rock, or progressive metal, the bass guitar player may play melody lines along with the lead guitar (or vocalist) and perform extended guitar solos.
Dynamic Instrument MicrophonesShure SM57Shure DMK5752 Drum Microphone PackSennheiser e604Electro-Voice RE20Audix D6 Bass Drum MicSee More Dynamic Instrument MicrophonesSmall-Diaphragm Condenser MicrophonesShure SM81Rode NT5See More Small-Diaphragm Condenser MicrophonesMicrophone AccessoriesOn-Stage Shure-Style Mic ClipSee More Microphone AccessoriesSee All Drum Microphones
But maybe you're looking for a kit that is truly special, one that will make jaws drop with its looks and ears perk up with its sounds. If that's what you have in mind, then you're really going to adore the DW Collector's Series Satin Specialty 5-Piece Shell Pack. This customizable kit is part of DW's flagship line, representing a pinnacle of performance power. This kit features maple shells that offer a great low-end punch and is absolutely loaded with massive tones and unparalleled versatility. Without a doubt, this kit makes the statement that you've arrived as a drummer. When you're pounding out the beat, you want it to sound great. That's why you should trust your sound to one of the great kits available here. Whether you're a first time drummer, or a legendary rocker headed on another world tour, we've got you covered.
A digital piano is a type of electronic keyboard designed to serve primarily as an alternative to the traditional piano, both in the way it feels to play and in the sound produced. It is intended to provide an accurate simulation of an acoustic piano. Some digital pianos are also designed to look like an ordinary piano, both the upright or grand piano. Digital pianos use either a synthesized emulation or samples of an actual piano, which are then amplified through an internal loudspeaker. Digital pianos incorporate weighted keys, which recreate the feel of an acoustic piano.