The second biggest factor that affects drum sound is head tension against the shell. When the hoop is placed around the drum head and shell and tightened down with tension rods, the tension of the head can be adjusted. When the tension is increased, the amplitude of the sound is reduced and the frequency is increased, making the pitch higher and the volume lower.
Most drummers have a single main ride, located near their right hand—within easy playing reach, as it is used very regularly—most often a 20" sizing but, 16"-24" diameters are not uncommon. It is most often a heavy, or medium-weighted cymbal that cuts through other instrumental sounds, but some drummers use a swish cymbal, sizzle cymbal or other exotic or lighter metal ride, as the main or only ride in their kit, particularly for jazz, gospel or ballad/folk sounds. In the 1960s Ringo Starr used a sizzle cymbal as a second ride, particularly during guitar solos.
In addition to pressing down one note at a time, bassists can also press down several notes at one time with their fretting hand to perform a double stop (two notes at once) or a chord. While double stops and chords are used less often by bassists than by electric guitarists playing rhythm guitar, a variety of double stops and chords can be performed on the electric bass. Some double stops used by bassists include octaves. Chords can be especially with effective on instruments with higher ranges such as six-string basses. Another variation to fully pressing down a string is to gently graze the string with the finger at the harmonic node points on the string, which creates chime-like upper partials (also called "overtones"). Glissando is an effect in which the fretting hand slides up or down the neck, which can be used to create a slide in pitch up or down. A subtle glissando can be performed by moving the fretting hand without plucking or picking the string; for a more pronounced effect, the string is plucked or picked first, or, in a metal or hardcore punk context, a pick may be scraped along the sides of the lower strings.
When a floor tom is added to make a four-piece kit, the floor tom is usually 14" for jazz, and 16" otherwise. This configuration is usually common in jazz, classic rock and rock and roll. Notable users include Ringo Starr in The Beatles, Mitch Mitchell in the Jimi Hendrix Experience, and John Barbata in the Turtles. For jazz, which normally emphasizes the use of ride cymbal, the lack of second hanging tom in a four-piece kit allows the cymbal to be positioned closer to the drummer, making them easier to be struck.
Of all the instruments in the band, drums and percussions have a role that's one of the most unique - and also one of the most important. When you play the drums, you're setting the pace and creating the song's rhythm. It's up to you to really get your listeners feeling the music. That's a tough challenge, but it's also a fun and rewarding thing to do. Here in this section, you'll find all the drums and percussion essentials to get it done.
With the explosion of the popularity of rock music in the 1960s, many more manufacturers began making electric basses, including the Japanese manufacturers Yamaha, Teisco and Guyatone. First introduced in 1960, the Fender Jazz Bass was known as the Deluxe Bass and was meant to accompany the Jazzmaster guitar. The Jazz Bass (often referred to as a "J-bass") featured two single-coil pickups, one close to the bridge and one in the Precision bass' split coil pickup position. The earliest production basses had a 'stacked' volume and tone control for each pickup. This was soon changed to the familiar configuration of a volume control for each pickup, and a single, passive tone control. The Jazz Bass' neck was narrower at the nut than the Precision bass — 1 1⁄2 inches (38 mm) versus 1 3⁄4 inches (44 mm) — allowing for easier access to the lower strings and an overall spacing and feel closer to that of an electric guitar, allowing trained guitarists to transition to the bass guitar more easily.
Drummers using electronic drums, drum machines, or hybrid acoustic-electric kits (which blend traditional acoustic drums and cymbals with electronic pads) typically use a monitor speaker, keyboard amplifier or even a small PA system to hear the electronic drum sounds. Even a drummer playing entirely acoustic drums may use a monitor speaker to hear her drums, especially if she is playing in a loud rock or metal band, where there is substantial onstage volume from huge, powerful guitar stacks. Since the drum kit uses the deep bass drum, drummers are often given a large speaker cabinet with a 15" subwoofer to help them monitor their bass drum sound (along with a full-range monitor speaker to hear the rest of their kit). Some sound engineers and drummers prefer to use an electronic vibration system, colloquially known as a "butt shaker" or "throne thumper" to monitor the bass drum, because this lowers the stage volume. With a "butt shaker", the "thump" of each bass drum strike causes a vibration in the drum stool; this way the drummer feels their beat on the posterior, rather than hears it.
Copyright © 1996-2018 American Musical Supply, Inc. All rights reserved. American Musical Supply reserves the right to correct pricing and/or product specifications in the event of typographical errors found in our print catalog or on our website. If a product is listed at an incorrect price due to such errors or because of inaccurate information received from a supplier, American Musical Supply shall have the right to refuse or cancel any orders placed, whether or not the order has been confirmed and your credit card charged. If your credit card has already been charged for the purchase and your order is canceled, American Musical Supply will issue a credit to your credit card account in the amount of the charge.
One of the main things to consider when looking at a 4-string bass (and every bass for that matter) is the material used to make its body. Bass guitars are traditionally made of different varieties of wood and feature a solid, hard-bodied design. Alder is a favorite amongst musicians because it produces a clear, full-bodied sound. For warmer, smoother tones, a mahogany bass might be the one for you. Another aspect to look into is a fretted or fretless electric bass guitar. On a fretted bass, the frets divide the fingerboard into semi tone divisions. These models make learning the bass easier because you have a guide for finger placement. Fretless basses offer a different sound because without frets the strings are directly pressed into the wood of the neck. This produces a softer sound because the string is in direct contact with the musician's finger and also allows you to slide up and down the neck with ease. The electric bass guitar is said to be the cornerstone of the band. It establishes the beat and brings a booming, punchy sound to the music. From Flea of the Red Hot Chili Peppers to Paul McCartney of the Beatles, musicians have been playing the bass for decades in modern, mainstream music groups. No matter what skill level you're at right now, these is certainly an electric bass guitar that will meet and exceed all your sound and style needs.
Once the basic parameters were established, I reached out to colleagues who are piano teachers or musical directors to get a sense of what models were in highest rotation in the professional world. I also played several models at the National Association of Music Merchants (NAMM) show in January. From there I searched through Amazon, Musician’s Friend, and Sweetwater for available models, then cross-checked that information with manufacturer websites and added anything that was missing. After considering all that information, I decided to limit the price to $500. That was high enough to include several quality-built keyboards that met all (or most) of the criteria without being too pricey. This gave me a list of 21 models from nine different companies.
While fretless basses are often associated with jazz and jazz fusion, bassists from other genres have used fretless basses, such as Freebo (country), Rick Danko (rock/blues), Rod Clements (folk), Steve DiGiorgio, Jeroen Paul Thesseling (metal), Tony Franklin (rock), and Colin Edwin (modern/progressive rock). Some bassists alternate between fretted and fretless basses in performances, according to the type of material or tunes they are performing, e.g., Pino Palladino or Tony Levin.
It comes with 4 strings that make it the ideal choice for anyone who is trying out the bass guitar for the first time. The 4 strings mean that the guitar will have a narrower body hence convenient for younger guitarists with smaller hands. The E-A-D-G format is also easy to master and play. The body is quite lightweight which gives you the comfortable feel as you use it with minimal fatigue.
A pick (or plectrum) produces a more pronounced attack, for speed, or personal preference. Bass with a pick is primarily associated with rock and punk rock, but player in other styles also use them. Jazz bassist Steve Swallow often plays with a pick, while Pink Floyd bassist Roger Waters uses one for a heavier tone. Mike Gordon of Phish uses a pick while also incorporating slapping techniques into his playing. Picks can be used with alternating downstrokes and upstrokes, or with all downstrokes for a more consistent attack. The pick is usually held with the index and thumb, with the up-and-down plucking motion supplied by the wrist.
Drums with cylindrical shells can be open at one end (as is the case with timbales), or can have two drum heads, one head on each end. Single-headed drums typically consist of a skin stretched over an enclosed space, or over one of the ends of a hollow vessel. Drums with two heads covering both ends of a cylindrical shell often have a small hole somewhat halfway between the two heads; the shell forms a resonating chamber for the resulting sound. Exceptions include the African slit drum, also known as a log drum as it is made from a hollowed-out tree trunk, and the Caribbean steel drum, made from a metal barrel. Drums with two heads can also have a set of wires, called snares, held across the bottom head, top head, or both heads, hence the name snare drum. On some drums with two heads, a hole or bass reflex port may be cut or installed onto one head, as with some 2010s era bass drums in rock music.
Swing drummers such as Max Roach and Kenny Clarke had already deviated from the large marching band-style bass drums, finding that they were too loud and boomy. Bebop drummers continued this trend, and they started trying out smaller bass drum sizes in the drum set. Bebop drummers' experimentations with new drum sizes and new sounds led to the innovative concept of applying the busy "four on the floor" bass drum rhythms to a new larger cymbal called the ride cymbal. By focusing on keeping time on the new ride cymbal instead of the bass drum, the "feel" went from bass drum and hi-hat heavy, to a lighter melodic feel that has been explained as "floating on top of the time". This allowed drummers to express themselves in a more melodic fashion by playing the rhythms used by the guitar, piano and sax players using the new smaller, more focused bass drums and snare. Louie Bellson also assisted in the innovative sizes and sounds of the 1940s drum set by pioneering the use of two bass drums, or the double bass drum kit.
Slap and pop style is also used by many bassists in other genres, such as rock (e.g., J J Burnel and Les Claypool), metal (e.g., Eric Langlois, Martin Mendez, Fieldy and Ryan Martinie), and jazz fusion (e.g., Marcus Miller, Victor Wooten and Alain Caron). Slap style playing was popularized throughout the 1980s and early 1990s by pop bass players such as Mark King (from Level 42) and rock bassists such as with Pino Palladino (currently a member of the John Mayer Trio and bassist for The Who), Flea (from the Red Hot Chili Peppers) and Alex Katunich (from Incubus). Spank bass developed from the slap and pop style and treats the electric bass as a percussion instrument, striking the strings above the pickups with an open palmed hand. Wooten popularized the "double thump," in which the string is slapped twice, on the upstroke and a downstroke (for more information, see Classical Thump). A rarely used playing technique related to slapping is the use of wooden dowel "funk fingers", an approach popularized by Tony Levin.
In other less mainstream genres, such as hardcore punk or metal, the pedagogical systems and training sequences are typically not formalized and institutionalized. As such, many players learn by ear, by copying bass lines from records and CDs, and by playing in a number of bands. Even in non-mainstream styles, though, students may be able to take lessons from experts in these or other styles, adapting learned techniques to their own style. As well, there are a range of books, playing methods, and, since the 1990s, instructional DVDs (e.g., how to play metal bass). In the 2010s, many instructional videos are available online on video-sharing websites such as YouTube.
So, let's say you've got all of your percussion picked out and set up - does it end there? The answer is: only if you want it to. Keeping it simple is just fine, but if you're the sort of drummer who wants everything personalized to a tee, then it's also worth checking out the selection of drum accessories and hardware. Full of ways to modify your percussion or change the way it's set up, these extras can give you the extra touch of customization to make a drum kit truly your own.
Drum bags are made from robust cloth such as cordura or from cloth-backed vinyl. They give minimal protection from bumps and impacts, but they do protect drums and cymbals from precipitation. They are adequate for drums transported in private vehicles to go to local gigs and sessions. They are often the only option for young drummers who are just starting out.
Drum sets are the backbone of your band. Keeping the pace and driving the rhythm section, the drummer makes sure that everything clicks. With that in mind, it's important that every drummer have a quality drum kit to keep them sounding their absolute best. The real benefit to purchasing a complete kit as opposed to individual components is convenience. You won't have to take the time to pore over separate drums, searching for just the right complementary sounds. These kits are made up of drums that are designed to sound great together from day one, allowing you to focus on your playing.
Multi-scale fingerboard is an alternative design for guitars and bass guitars in which the lower-pitched strings gain more length and the higher-pitched strings get shorter, similar to the string lengths on a grand piano. The reason for the uneven scale length across strings is that it evens out the tension across all of the strings, it evens the timbre across the strings, and extending the lower string scales allows the string to produce harmonics that are more in tune with the fundamental.
To keep proper pitch across all frets in a multi-scale bass guitar, a fanned fret design is applied to the fingerboard. In this case, the frets extend from the neck of the instrument at an angle, in contrast to the standard perpendicular arrangement in standard neck designs, in which the fret spacing is wider for the long scale and closer for the short scale. This is not to be confused with perfect intonation across the whole neck, which is a feature of true temperament frets. Proponents of multi-scale and fanned frets designs also claim benefits such as comfort and better ergonomics.
Sheet music from the 1920s provides evidence that the drummer's sets were starting to evolve in size and sound to support the various acts mentioned above. However, the first "talkies" or films with audio, were released circa 1927 and by 1930 most films were released with a soundtrack and the silent film era was over. The downside of the technological breakthrough was that thousands of drummers who served as sound effect specialists were put out of work overnight. A similar panic was felt by drummers in the 1980s, when electronic drum machines were first released.
In "miking" a drum kit, dynamic microphones, which can handle high sound-pressure levels, are usually used to close-mic drums, which is the predominant way to mic drums for live shows. Condenser microphones are used for overheads and room mics, an approach which is more common with sound recording applications. Close miking of drums may be done using stands or by mounting the microphones on the rims of the drums, or even using microphones built into the drum itself, which eliminates the need for stands for these microphones, reducing both clutter and set-up time, as well as isolating them.
A unique effect can be created by striking an open hi-hat (i.e., in which the two cymbals are apart) and then closing the cymbals with the foot pedal; this effect is widely used in disco and funk. The hi-hat has a similar function to the ride cymbal. The two are rarely played consistently for long periods at the same time, but one or the other is used to keep the faster-moving rhythms (e.g., sixteenth notes) much of the time in a song. The hi-hats are played by the right stick of a right-handed drummer. Changing between ride and hi-hat, or between either and a "leaner" sound with neither, is often used to mark a change from one passage to another, for example; to distinguish between a verse and chorus.
Yamaha YPG-535 88-Key Portable Grand Keyboard with Stand New from$499.99In Stockor 8 payments of $62.50 Free Ground Shipping Yamaha P-125 Digital Stage Piano, 88-Key New from$599.99In Stockor 12 payments of $50 Free Ground Shipping Roland RD-2000 Digital Stage Piano New from$2,599.99In Stockor 12 payments of $216.67 Free Ground Shipping Alesis Recital Pro Digital Stage Piano, 88-Key New from$349.00In Stockor 8 payments of $43.63 Free Ground Shipping See All Digital Stage Pianos
These keyboards are perfect for any student, child to elder, who is interested in learning how to play piano. They are inexpensive, have built-in speakers so an extra amplifier isn’t necessary, and include multiple piano sounds and simulated acoustic-piano action (aka “key feel”). These keyboards are relatively light—all our picks weigh around 26 pounds—so it’s possible for one person to carry the piano when necessary.
I have been playing piano since the early 1980s, and I earned a Bachelor of Music with an audio production and piano focus from Ithaca College as well as a Masters in Music in keyboard collaborative arts from the University of Southern California. For the past 20 years, I’ve been a professional music director and have performed myriad musical styles on different instruments in concert halls and on nightclub stages. I also taught music for 10 years at a private Los Angeles middle and high school.
Kawai’s exceptional line of digital pianos is the result of a never-ending effort to create the world’s most authentic and innovative digital pianos. Relying on our rich experience in building fine acoustic pianos, Kawai builds digital pianos that offer the finest touch and tone available. Wooden-key actions, Harmonic Imaging sound technology, USB digital audio and the unique Soundboard Speaker System are just a few of the innovations found in our digital pianos and keyboards.
Portable digital pianos, for the sake of lower production cost, were often equipped with a less complex system for the weighted keys. As a result, the feel of the keys is usually much less realistic than other digital pianos. However, it still retain the emulated weight mechanism (lower keys are heavier than higher ones), though not as precise as more expensive pianos. However, certain models include synthetic ivory-like keys as opposed to standard plastic keys.