If you’re looking for something that better mimics an acoustic piano and can serve as the focal point of a room, check out our digital console piano recommendations, which are better at emulating the action and sound of a traditional piano than the keyboards in this guide. However, they are also much heavier and cost three to four times more than our most expensive pick here.
In most genres, a "clean" bass tone (without any amplifier-induced "overdrive" or "distortion") is desirable, and so while guitarists often prefer the more desirable distorted tones of tube-transistor amplifiers, bassists commonly use solid-state amplifier circuitry to achieve the necessary high output wattages with less weight than tubes (though smaller tubes can often still be found in the low-power "preamplifier" sections of the system, where they provide a warmer, smoother character to the bass tone for relatively little additional weight). A few all-tube bass amplifiers are still available, notably from the Ampeg brand.
Digital pianos typically use analog sensors for its keyboard action, as opposed to digital sensors of a regular keyboard and synthesizer. These sensors notably works in a similar way to those used in analog joysticks found on video game controllers, in which they the velocity input is converted from the key movement as well, not just the initial pressure of the key sensor.
Sticks were traditionally made from wood (particularly maple, hickory, and oak} but more recently metal, carbon fibre and other exotic materials have been used for high market end sticks. The prototypical wooden drum stick was primarily designed for use with the snare drum, and optimised for playing snare rudiments. Sticks come in a variety of weights and tip designs; 7N is a common jazz stick with a nylon tip, while a 5B is a common wood tipped stick, heavier than a 7N but with a similar profile, and a common standard for beginners. Numbers range from 1 (heaviest) to 10 (lightest).
However, with the technological advances, recent digital pianos are mostly capable of recreating string resonances, reverberations and other acoustical effects via digital signal processing (DSP) and modeling technology. One example is the Casio Privia, which is able to generate such acoustical effects by means of a simple DSP, which is far less complex than physical modeling.
A drum kit — also called a drum set, trap set (a term using a contraction of the word, “contraption”), or simply drums — is a collection of drums and other percussion instruments, typically cymbals, which are set up on stands to be played by a single player, with drumsticks held in both hands, and the feet operating pedals that control the hi-hat cymbal and the beater for the bass drum. A drum kit consists of a mix of drums (categorized classically as membranophones, Hornbostel-Sachs high-level classification 2) and idiophones – most significantly cymbals, but can also include the woodblock and cowbell (classified as Hornbostel-Sachs high-level classification 1). In the 2000s, some kits also include electronic instruments (Hornbostel-Sachs classification 53). Also, both hybrid (mixing acoustic instruments and electronic drums) and entirely electronic kits are used.
In the two-handed tapping styles, bassists use both hands to play notes on the fretboard by rapidly pressing and holding the string to the fret. Instead of plucking or picking the string to create a sound, in this technique, the action of striking the string against the fret or the fretboard creates the sound. Since two hands can be used to play on the fretboard, this makes it possible to play interweaving contrapuntal lines, to simultaneously play a bass line and a simple chord, or play chords and arpeggios. Bassist John Entwistle of The Who tapped percussively on the strings, causing them to strike the fretboard with a twangy sound to create drum-style fills. Players noted for this technique include Cliff Burton, Billy Sheehan, Stuart Hamm, John Myung, Victor Wooten, Les Claypool, Mark King, and Michael Manring. The Chapman Stick and Warr Guitars are string instruments specifically designed to play using two-handed tapping.
The smallest and largest drums without snares, octobans and gong drums respectively, are sometimes considered toms. The naming of common configurations (four-piece, five-piece, etc.) is largely a reflection of the number of toms, as only the drums are conventionally counted, and these configurations all contain one snare and one or more bass drums, (though not regularly any standardized use of 2 bass/kick drums) the balance usually being in toms.
Virtual drums are a type of audio software that simulates the sound of a drum kit using synthesized drum kit sounds or digital samples of acoustic drum sounds. Different drum software products offer a recording function, the ability to select from several acoustically distinctive drum kits (e.g., jazz, rock, metal), as well as the option to incorporate different songs into the session. Some software for the personal computer (PC) can turn any hard surface into a virtual drum kit using only one microphone.
Lunes-Domingo de 9AM a 7PM EST Customize Search Results for Your Location change location SitemapView Our SitemapContact UsBlogBy EmailPlace a Purchase OrderReturn RequestLet Us Help YouFAQsProduct ConditionShipping InformationPayment OptionsOrder VerificationReturnsNotice of AccessibilityAffiliate ProgramJoin Our Affiliate Program Follow zZounds on:
Jump up ^ Information on Dodds is found in his own contemporary journals/biography "The Baby Dodds Story" -Louisiana State University Press, 1992, and by contemporary witness- drummer Gearge Wettling, who confirms Dodds was the first drummer to also keep the now-famous broken-triplet beat that became the standard pulse/roll of what we call ride cymbal playing.
Popular music bands and rock groups use the bass guitar as a member of the rhythm section, which provides the chord sequence or "progression" and sets out the "beat" for the song. The rhythm section typically consists of a rhythm guitarist or electric keyboard player, or both, a bass guitarist and a drummer; larger groups may add additional guitarists, keyboardists, or percussionists.
Instruments handmade by highly skilled luthiers are becoming increasingly available in the 2010s. Exotic materials in high-end instruments include woods such as bubinga, wenge, ovangkol, ebony, and goncalo alves. Some makers use graphite composite to make lightweight necks More expensive basses often feature exotic woods. For example, Alembic uses cocobolo as a body or top layer material because of its attractive grain. Warwick bass guitars are well known for exotic hardwoods, making most necks out of ovangkol, and fingerboards from wenge or ebony. Some makers use solid bubinga bodies for their tonal and aesthetic qualities.
The effects, on the other hand, are great, and there are a lot of them: eight different reverbs, eight choruses, and three modulation effects (tremolo, vibrato, or rotary speaker). The keyboard stores your effect settings for each of the 12 sounds in memory, so they’ll be restored when you choose that sound again or turn the keyboard off. These are likely to be less important and useful for a beginner than basic sounds, though effects might appeal to those looking for an inexpensive performance piano.
The electric bass is a relative newcomer to the world of jazz. The big bands of the 1930s and 1940s Swing era and the small combos of the 1950s Bebop and Hard Bop movements all used the double bass. The electric bass was introduced in some bands in the 1950s and it became prominent during the late 1960s and early 1970s, when rock influences were blended with jazz to create jazz-rock fusion.
As well as providing an alternative to a conventional acoustic drum kit, electronic drums can be incorporated into an acoustic drum kit to supplement it. MIDI triggers can also be installed into acoustic drum and percussion instruments. Pads that can trigger a MIDI device can be homemade from a piezoelectric sensor and a practice pad or other piece of foam rubber.
Bass drum Muffling the bass can be achieved with the same muffling techniques as the snare, but bass drums in a drum kit are more commonly muffled by adding pillows, a sleeping bag or another soft filling inside the drum, between the heads. Cutting a small hole in the resonant head can also produce a more muffled tone, and allows manipulation in internally placed muffling. The Evans EQ pad places a pad against the batterhead and, when struck, the pad moves off the head momentarily, then returns to rest against the head, thus reducing the sustain without choking the tone.
With rock and roll coming into place, a watershed moment occurred between 1962 and 1964 when the Surfaris released "Wipe Out", as well as when Ringo Starr of The Beatles played his Ludwig kit on American television. As rock moved from the nightclubs and bars and into stadiums in the 1960s, there was a trend towards bigger drum kits. The trend towards larger drum kits took momentum in the 1970s with the emergence of progressive rock. By the 1980s, widely popular drummers like Billy Cobham, Carl Palmer, Nicko McBrain, Phil Collins, Stewart Copeland, Simon Phillips and Neil Peart were using large numbers of drums and cymbals. In the 1980s, some drummers began to use electronic drums.
If you really want to distinguish yourself as a bassist, it can pay to think outside the box and go for something a bit less traditional. For example, there are musical styles and occasions where an electric bass may be slightly out of place. In those cases, you can turn to an acoustic-electric bass. These have a classic sound all their own, and if you're headed to a festival or singing around a campfire, they'll do the job even without an amplifier handy.
The fretting hand can also be used to sound notes, either by plucking an open string with the fretting hand, or, in the case of a string that has already been plucked or picked, by "hammering on" a higher pitch or "pulling off" a finger to pluck a lower fretted or open stringed note. Jazz bassists use a subtle form of fretting hand pizzicato by plucking a very brief open string grace note with the fretting hand right before playing the string with the plucking hand. When a string is rapidly hammered on, the note can be prolonged into a trill.
A common feature of more expensive basses is "neck-through" construction. Instead of milling the body from a single piece of wood (or "bookmatched" halves) and then attaching the neck into a pocket (so-called "bolt-on" design), neck-through basses are constructed first by assembling the neck, which may comprise one, three, five or more layers of wood in vertical stripes, which are longer than the length of the fretboard. To this elongated neck, the body is attached as two wings, which may also be made up of several layers. The entire bass is then milled and shaped. Neck-through construction advertisements claim this approach provides better sustain and a mellower tone than bolt-on neck construction. While neck-through construction is most common in handmade "boutique" basses, some models of mass-produced basses such as Ibanez's BTB series also have neck-through construction. Bolt-on neck construction does not necessarily imply a cheaply made instrument; virtually all traditional Fender designs still use bolt-on necks, including its high-end instruments costing thousands of dollars, and many boutique luthiers such as Sadowsky build bolt-on basses as well as neck-through instruments.
Toward the end of the 1920s, variations of the hi-hats were introduced. One of the most popular hand held hi-hat cymbal variations used was called the "hand sock cymbals". The reason for the name "hi-hat" was because earlier versions of the hi-hat were referred to as a "low boy". The evolution that became the "hi-hats" allowed drummers to play the two cymbals with drum sticks while simultaneously controlling how open or closed the two cymbals were with their foot. The pedal could also be used to play the cymbals with the foot alone, while the right hand played other drums. By the 1930s, Ben Duncan and others popularized streamlined trap kits leading to a basic four piece drum set standard: bass, snare, tom-tom, and a larger floor tom. In time, legs were fitted to larger floor toms, and "consolettes" were devised to hold smaller tom-toms (ride toms) on the bass drum.
In 1953, following Fender's lead, Gibson released the first short scale violin-shaped electric bass, with an extendable end pin so a bassist could play it upright or horizontally. Gibson renamed the Electric Bass in 1958 to the EB-1. Also in 1958 Gibson released the maple arched top EB-2 described in the Gibson catalogue as "A hollow-body electric bass that features a Bass/Baritone pushbutton for two different tonal characteristics". In 1959 these were followed by the more conventional-looking EB-0 Bass. The EB-0 was very similar to a Gibson SG in appearance (although the earliest examples have a slab-sided body shape closer to that of the double-cutaway Les Paul Special).
Drummers' usage of electronic drum equipment can range from adding a single electronic pad to an acoustic kit (e.g., to have access to an instrument that might otherwise be impractical, such as a large gong), to using a mix of acoustic drums/cymbals and electronic pads, to using an acoustic kit in which the drums and cymbals have triggers, which can be used to sound electronic drums and other sounds, to having an exclusively electronic kit, which is often set up with the rubber or mesh drum pads and rubber "cymbals" in the usual drum kit locations. A fully electronic kit weighs much less and takes up less space to transport than an acoustic kit and it can be set up more quickly. One of the disadvantages of a fully electronic kit is that it may not have the same "feel" as an acoustic kit, and the drum sounds, even if they are high-quality samples, may not sound the same as acoustic drums.
Finally, the last but not the least, you need to consider the price of the guitar when purchasing a bass guitar. Before setting your foot in the store, you need to set a budget in your mind for how much you want to spend. As a beginner, you will probably want to take a look at the entry level models. You can pick up one that sounds quite nice for under $500. If you are still uncertain whether you want to make it a full-time commitment to playing the bass, try to look for a cheaper model. A decent guitar can be had for around $200. Try not to be tempted by some shiny, more expensive models as they are beyond your skill level at this point may be. You can always buy something more advanced and high quality when you get better in your bass guitar training.
Some basses, particularly expensive boutique instruments or custom-made guitars, use more unusual pickup configurations. Examples include a soapbar and a "P" pickup (found on some Fender basses), bassist Stu Hamm's "Urge" basses, which have a "P" pickup sandwiched between two "J" pickups, and some of funk bassist Bootsy Collins' custom basses, which had as many as five J pickups. Another unusual pickup configuration is found on some of the custom basses that virtuoso bassist Billy Sheehan uses, in which there is one humbucker at the neck and a split-coil pickup at the middle position.
Pearl Corporation is organized and functions as a wholesale distributor of drums, percussion musical instruments and flutes for the United States. The majority of drums and related items are manufactured by Pearl Musical Instrument company and imported directly from company owned factories located in Taiwan and China. The flutes are manufactured in Taiwan and Japan while the latin percussion instruments are manufactured in Thailand. Pearl Corporation is also the exclusive U.S. distributor of Adams timpani and mallet percussion instruments.
Snare drum and tom-tom Typical ways to muffle a snare or tom include placing an object on the outer edge of the drumhead. A piece of cloth, a wallet, gel, or fitted rings made of mylar are common objects. Also used are external clip-on muffles that work using the same principle. Internal mufflers that lie on the inside of the drumhead are often built into a drum, but are generally considered less effective than external muffles, as they stifle the initial tone, rather than simply reducing the sustain of it.