This guitar has got a maple C-shape neck with a 9.5-inch radius and 20 medium jumbo frets. Most bass playing occurs in the lower fret positions that make 20 frets ideal for bass playing. The single coil feature is quite simple to use and it will create both a bright and focused sound quality. If you are looking for a bass guitar that plays on a small scale, this is just the right one for you.
Other kits will normally have 12" and 13" hanging toms plus either a 14" hanging tom on a stand, a 14" floor tom, or a 16" floor tom. For depths, see Tom-tom drum#Modern tom-toms. In the 2010s, it is very popular to have 10" and 12" hanging toms, with a 16" floor tom. This configuration is often called a hybrid setup. The bass drum is most commonly 22" in diameter, but rock kits may use 24", fusion 20", jazz 18", and in larger bands up to 26". A second crash cymbal is common, typically an inch or two larger or smaller than the 16", with the larger of the two to the right for a right-handed drummer, but a big band may use crashes up to 20" and ride up to 24" or, very rarely, 26". A rock kit may also substitute a larger ride cymbal or larger hi-hats, typically 22" for the ride and 15" for the hats.
There are several reasons for this division. When more than one band plays in a single performance, the drum kit is often considered part of the backline (the key rhythm section equipment that stays on stage all night, which often also includes bass amps and a stage piano), and is shared between/among the drummers. Oftentimes, the main "headlining" act will provide the drums, as they are being paid more, possibly have the better gear, and in any case have the prerogative of using their own. Sticks, snare drum and cymbals, and sometimes other components, are commonly swapped though, each drummer bringing their own. The term breakables in this context refers to whatever basic components the "guest" drummer is expected to bring. Similar considerations apply if using a "house kit" (a drum kit owned by the venue, which is rare), even if there is only one band at the performance.
1956 saw the appearance at the German trade fair "Musikmesse Frankfurt" of the distinctive Höfner 500/1 violin bass made using violin construction techniques by Walter Höfner, a second generation violin luthier. The instrument is often known as the "Beatle Bass", due to its endorsement and use by Beatles bassist Paul McCartney. In 1957 Rickenbacker introduced the model 4000 bass, the first bass to feature a neck-through-body design in which the neck is part of the body wood. The Fender and Gibson versions used bolt-on and glued-on necks.
The hi-hat cymbals (nicknamed "hats") consist of two cymbals mounted facing each other on a metal pole with folding support legs that keep a hollow support cylinder standing up. Like the bass drum, the hi-hat has a foot pedal. The bottom cymbal is fixed in place. The top cymbal is mounted on a thin pole which is inserted into the hollow cymbal stand cylinder. The thin pole is connected to a foot pedal. When the foot pedal is pressed down, a mechanism causes the thin pole to move down, causing the cymbals to move together. When the foot is lifted off the pedal, the cymbals move apart, due to the pedal's spring-loaded mechanism. The hi-hats can be sounded by striking the cymbals with one or two sticks or just by opening and closing the cymbals with the footpedal, without striking the cymbals. The ability to create rhythms on the hi-hats with the foot alone enables drummers to use both sticks on other drums or cymbals. Different sounds can be created by striking "open hi-hats" (without the pedal depressed, which creates a noisy sound nicknamed "sloppy hats") or a crisp "closed hi-hats" sound (with the pedal pressed down). As well, the high hats can be played with a partially depressed pedal.
Toward the end of the 1920s, variations of the hi-hats were introduced. One of the most popular hand held hi-hat cymbal variations used was called the "hand sock cymbals". The reason for the name "hi-hat" was because earlier versions of the hi-hat were referred to as a "low boy". The evolution that became the "hi-hats" allowed drummers to play the two cymbals with drum sticks while simultaneously controlling how open or closed the two cymbals were with their foot. The pedal could also be used to play the cymbals with the foot alone, while the right hand played other drums. By the 1930s, Ben Duncan and others popularized streamlined trap kits leading to a basic four piece drum set standard: bass, snare, tom-tom, and a larger floor tom. In time, legs were fitted to larger floor toms, and "consolettes" were devised to hold smaller tom-toms (ride toms) on the bass drum.
Like the electric guitar, the electric bass guitar is almost always connected to an amplifier and a speaker with a patch cord for live performances. Electric bassists use either a "combo" amplifier, which combines an amplifier and a speaker in a single cabinet, or an amplifier and one or more speaker cabinets (typically stacked, with the amplifier sitting on the speaker cabinets, leading to the term "half-stack" for one cabinet setups and "full stack" for two).
The fact that it comes with 4 strings means that it will be narrower. One of the best-fretted guitars you can get for your money. The fret design has been around for long and this is so because of its simplicity. With the frets dividing the fingerboard, you'll get to see the position to play each note on the neck. Definitely, makes guitar playing much easier. Warm resonance, comfortable balance and fat tones, that’s the guitar offer to you.
The fretting hand—the left hand for right-handed bass players and right hand for left-handed bass players—presses down the strings to play different notes and shape the tone or timbre of a plucked or picked note. One fretting technique is a finger per fret, where each finger in the fretting hand plays one fret in a given position, giving the advantage that full chromatic scale of over an octave and a half can be played with no up-down wrist movement. Also, the double bass-style technique can be used for fretting. This technique involves using four fingers in the space of three frets, especially in the lower positions (i.e., the fretting positions closer to the nut, where the space between notes is the widest). When considering the spacing between notes, this is a comfortable distance for the average person's hand size, however it requires more up-down hand movements. The main advantage of the "four fingers in three frets technique is less tendon strain, leading to a diminished likelihood of Repetitive Strain Injury (RSI). The image below (of a bassist performing tapping) shows the four-in-three.
Maybe you've already got a specific brand in mind and want to see all the digital pianos they offer. All you have to do is click on the brand on the left hand side of the screen and within a few moments you'll have access to everything that's available. For that matter, you can always play is safe and stick to the top-rated items…and there are plenty of those in this selection.