Torzal Natural Twist is a bass guitar body and neck style invented by luthier Jerome Little from Amherst, Massachusetts. It consists of a neck rotated by a total of 35 degrees, with (+)15 degrees at the bridge and (-)20 at the nut. The designer claims that the ergonomic design increases efficiency of the hands, wrists and arms, which reduces the risk of developing repetitive strain injuries like carpal tunnel syndrome or tendonitis. This design is also beneficial to players who have already suffered from such injuries. This patented design differs from traditional bass guitar design by twisting the neck, and bringing the strings toward a more natural hand position at either end of the instrument. The rotation at either side of the instrument in the direction of the hand creates a neck plane that models the natural motion of the hand as it reaches outward. The fretboard also forms a straight line at the location of each string, which should improve the ease of performance.
The fretting hand can add vibrato to a plucked or picked note, either a gentle, narrow vibrato or a more exaggerated, wide vibrato with bigger pitch variations. For fretted basses, vibrato is always an alternation between the pitch of the note and a slightly higher pitch. For fretless basses, the player can use this style of vibrato, or they can alternate between the note and a slightly lower pitch, as is done with the double bass and on other unfretted stringed instruments. While vibrato is mostly done on "stopped" notes—that is, notes that are pressed down on the fingerboard—open strings can also be vibratoed by pressing down on the string behind the nut. As well, the fretting hand can be used to "bend" a plucked or picked note up in pitch, by pushing or pulling the string so that the note sounds at a higher pitch. To create the opposite effect, a "bend down", the string is pushed to a higher pitch before being plucked or picked and then allowed to fall to the lower, regular pitch after it is sounded. Though rare, some bassists may use a tremolo bar-equipped bass to produce the same effect.
By World War I, drum kits were often marching band-style military bass drums with many percussion items suspended on and around them. Drum kits became a central part of jazz music, especially Dixieland. The modern drum kit was developed in the Vaudeville era during the 1920s in New Orleans. In 1917, a New Orleans band called "The Original Dixieland Jazz Band " recorded jazz tunes that became hits all over the country. These were the first official jazz recordings. Drummers such as Baby Dodds, "Zutty" Singleton and Ray Bauduc had taken the idea of marching rhythms, combining the bass drum and snare drum and "traps", a term used to refer to the percussion instruments associated with immigrant groups, which included miniature cymbals, tom toms, cowbells and woodblocks. They started incorporating these elements with ragtime, which had been popular for a couple of decades, creating an approach which evolved into a jazz drumming style.
The bass guitar is an electric instrument that performs in both lead and backing roles. They are commonly used across a huge variety of musical genres and are attractive for their versatility, sound, and design. Manufacturers such as Fender and Ibanez offer a variety of both modern and vintage bass guitars, and each has multiple models with their own characteristics.
A sizzler is a metal chain or combination of chains that is hung across a cymbal, creating a distinctive metallic sound when the cymbal is struck similar to that of a sizzle cymbal. Using a sizzler is the non-destructive alternative to drilling holes in a cymbal and putting metal rivets in the holes. Another benefit of using a "sizzler" chain is that the chain can be removed and the cymbal will return to its normal sound (in contrast, a cymbal with rivets would have to have the rivets removed). Some sizzlers feature pivoting arms that allow the chains to be quickly raised from the cymbal, or lowered onto it, allowing the effect to be used for some songs and removed for others.
First of all, it comes with 20 medium jumbo frets. Since the best bass quality can be found in the lower fret numbers, 20 will definitely give you what you seek. It comes with the single coil pickup lines; you get to have a focused as well as a bright sound. Though there will be a little bit of noise as is the case when it comes to the single-line pickups.
Whether you're in the market for a new bass, or are picking one up for the first time, finding the right instrument is the first step on the road to becoming the best bass player you can be. Researching all that's available will be extremely helpful in making the decision of which electric bass guitar to choose. A bass guitar typically has an appearance and construction similar to an electric guitar, with a longer neck and a range of courses from four to eight strings. Most common is the 4-string bass which is usually tuned to the sound of the double bass, but conveniently comes in a much smaller package.
A fill is a departure from the repetitive rhythm pattern in a song. A drum fill is used to "fill in" the space between the end of one verse and the beginning of another verse or chorus. Fills vary from a simple few strokes on a tom or snare, to a distinctive rhythm played on the hi-hat, to sequences several bars long that are short virtuosic drum solos. As well as adding interest and variation to the music, fills serve an important function in preparing and indicating significant changes of sections in songs and linking sections. A vocal cue is a short drum fill that introduces a vocal entry. A fill ending with a cymbal crash on beat one is often used to lead into a chorus or verse.
In some cases, to play the bass through PA amplification, it is plugged into a direct box or DI, which routes the signal to the bass amp while also sending the signal directly into a mixing console, and thence to the main and monitor speakers. When a recording of bass is being made, engineers may use a microphone set up in front of the amplifier's speaker cabinet for the amplified signal, a direct box signal that feeds the recording console, or a mix of both.
Instruments handmade by highly skilled luthiers are becoming increasingly available in the 2010s. Exotic materials in high-end instruments include woods such as bubinga, wenge, ovangkol, ebony, and goncalo alves. Some makers use graphite composite to make lightweight necks More expensive basses often feature exotic woods. For example, Alembic uses cocobolo as a body or top layer material because of its attractive grain. Warwick bass guitars are well known for exotic hardwoods, making most necks out of ovangkol, and fingerboards from wenge or ebony. Some makers use solid bubinga bodies for their tonal and aesthetic qualities.
Some basses, particularly expensive boutique instruments or custom-made guitars, use more unusual pickup configurations. Examples include a soapbar and a "P" pickup (found on some Fender basses), bassist Stu Hamm's "Urge" basses, which have a "P" pickup sandwiched between two "J" pickups, and some of funk bassist Bootsy Collins' custom basses, which had as many as five J pickups. Another unusual pickup configuration is found on some of the custom basses that virtuoso bassist Billy Sheehan uses, in which there is one humbucker at the neck and a split-coil pickup at the middle position.
A well-known bass humbucker is the pickup used on the Music Man series of basses; it has two coils, each with four large polepieces. This style is known as the "MM" pickup for this reason, and many aftermarket pickup manufacturers (companies that make and sell pickups that you can custom-add to your bass) and custom bass builders incorporate these pickups in their designs. The most common configurations are a single pickup at the bridge, two pickups similar in placement to a Jazz Bass, or an MM pickup at the bridge with a single-coil pickup (often a "J") at the neck. These pickups can often be "tapped", meaning one of the two coils can be essentially turned off, giving a sound similar to a single-coil pickup.
Drum kit music is either written down in music notation (called "drum parts"), learned and played "by ear", improvised or some combination of some or all three of these methods. Professional session musician drummers and Big Band jazz drummers are often required to read drum parts. Drum parts are most commonly written on a standard five-line staff. In 2016, a special percussion clef is used, while previously the bass clef was used. However, even if the bass or no clef is used, each line and space is assigned an instrument of the kit, rather than to a pitch. In jazz, traditional music, folk music, rock music and pop music, drummers are expected to be able to learn songs by ear (from a recording or from another musician who is playing or singing the song) and improvise. The degree of improvisation differs in different styles. Jazz and jazz fusion drummers may have lengthy improvised solos in every song. In rock music and blues, there are also drum solos in some songs, although they tend to be shorter than those in jazz. Drummers in all popular music and traditional music styles are expected to be able to improvise accompaniment parts to songs, once they are told the genre or style (e.g., shuffle, ballad, slow blues, etc.).
Over the decades, the possibilities of what a musician can do with a digital piano have grown tremendously. With technology advancing by the second, players are discovering new, innovative ways to manipulate their sound - even beyond the use of volume, expression and sustain pedals. MIDI (short for Musical Instrument Digital Interface) was introduced in the early 1980s and allows digital pianists to connect their instrument to a computer so it can control (or be controlled by) other sequencers and instruments. MIDI digital pianos often have a disk drive to upload other MIDI data. Common effects and instruments that MIDI can offer are: tremolo, phasers, chorus, stringed instruments and drum sounds. Digital Pianos (including models with MIDI connection) are offered by many respected musical instrument brands, with Williams and Yamaha being among the most popular.
All cymbals other than rides, hi-hats and crashes/splashes are usually called effects cymbals when used in a drum kit, though this is a non-classical or colloquial designation that has become a standardized label. Most extended kits include one or more splash cymbals and at least one china cymbal. Major cymbal makers produce cymbal extension packs consisting of one splash and one china, or more rarely a second crash, a splash and a china, to match some of their starter packs of ride, crash and hi-hats. However any combination of options can be found in the marketplace.
As well as providing an alternative to a conventional acoustic drum kit, electronic drums can be incorporated into an acoustic drum kit to supplement it. MIDI triggers can also be installed into acoustic drum and percussion instruments. Pads that can trigger a MIDI device can be homemade from a piezoelectric sensor and a practice pad or other piece of foam rubber.