Other design options include finishes, such as lacquer, wax and oil; flat and carved designs; luthier-produced custom-designed instruments; headless basses, which have tuning machines in the bridge of the instrument (e.g., Steinberger and Hohner designs) and several artificial materials such as luthite. The use of artificial materials (e.g., BassLab) allows for unique production techniques such as die-casting, to produce complex body shapes. While most basses have solid bodies, they can also include hollow chambers to increase the resonance or reduce the weight of the instrument. Some basses are built with entirely hollow bodies, which change the tone and resonance of the instrument. Acoustic bass guitars have a hollow wooden body constructed similarly to an acoustic guitar, and are typically equipped with piezoelectric or magnetic pickups and amplified.
Much the same considerations apply to bass drum pedals and the stool, but these are not always considered breakables, particularly if changeover time between bands is very limited. Swapping the snare drum in a standard kit can be done very quickly. Replacing cymbals on stands takes longer, particularly if there are many of them, and cymbals are easily damaged by incorrect mounting, so many drummers prefer to bring their own cymbal stands.
Timbales are tuned much higher than a tom of the same diameter, and normally played with very light, thin, non-tapered sticks. They have relatively thin heads and a very different tone than a tom, but are used by some drummers/percussionists to extend the tom range upwards. Alternatively, they can be fitted with tom heads and tuned as shallow concert toms. Attack timbales and mini timbales are reduced-diameter timbales designed for drum kit usage, the smaller diameter allowing for thicker heads providing the same pitch and head tension. They are recognizable in 2010s genres and in more traditional forms of Latin, reggae & numerous world music styles. Timbales were also used on occasion by Led Zeppelin drummer John Bonham. Gong drums are a rare extension to a drum kit. The single-headed mountable drum appears similar to a bass drum (sizing around 20–24 inches in diameter), but has the same purpose as that of a floor tom. Similarly, most hand drum percussion cannot be played easily or suitably with drum sticks without risking damage to the head and to the bearing edge, which is not protected by a metal drum rim, like a snare or tom. For use in a drum kit, they may be fitted with a metal drum head and played with care, or played by hand.
The bare minimum requirements for a budget digital piano are to have 88 keys (the same number found on traditional acoustic pianos) and internal speakers to facilitate practicing without an amplifier. Beyond that, some amount of weighted key action (either semi-weighted or hammer action, more on this in a moment) and an accurate piano sound were the primary deciding factors for our picks. An included stand and sustain pedal were not requirements, as aftermarket options are readily available and inexpensive. (We discuss some options below.)
Digital pianos and keyboards are designed to accomplish very different things. Digital pianos, as the name suggests, are intended simply to be a digital replication of an acoustic or grand piano. Digital pianos have weighted keys so that the experience of playing one more closely resembles a traditional piano. Digital pianos are ideal for those who want to learn to play the piano but don’t want to pay the incredibly high cost of purchasing one or deal with the hassle of finding space for one. After all, there’s almost nothing cheap, easy, or convenient about buying or owning a traditional piano. Digital pianos have been designed to mitigate these factors by being less expensive, easier to maintain, and much easier to transport. Digital pianos are also beneficial for more advanced musicians that want to record their music onto a computer.
Whereas Fender basses had pickups mounted in positions in between the base of the neck and the top of the bridge, many of Gibson's early basses featured one humbucking pickup mounted directly against the neck pocket. The EB-3, introduced in 1961, also had a "mini-humbucker" at the bridge position. Gibson basses also tended to be smaller, sleeker instruments; Gibson did not produce a 34-inch (864 mm) scale bass until 1963 with the release of the Thunderbird, which was also the first Gibson bass to use dual-humbucking pickups in a more traditional position, about halfway between the neck and bridge. A number of other companies also began manufacturing bass guitars during the 1950s: Kay in 1952, Hofner and Danelectro in 1956, Rickenbacker in 1957 and Burns/Supersound in 1958.
Five strings usually tuned B0–E1–A1–D2–G2, providing extended lower range. Another common tuning on early 1970s five-string basses added a high note instead of a low note: E–A–D–G–C, known as tenor tuning. This tuning is still popular among jazz and solo bassists. Other tunings, such as C–E–A–D–G are rare. Some bassists like C as the lowest pitch because that's the lowest note on an upright bass with a C, and C is a common note in a few popular keys C (e.g., C major, G major, F major). Some players may detune the lowest string to B♭ or A. B♭ is common for bassists who play in brass bands, as B♭ is an important and common key for this type of ensemble. Relative to a four-string bass, the fifth string provides a greater lower range (with a low B, C, or A) or a greater upper range (with a high C or B is added) and provides more notes for any single hand position. The earliest five string was created by Fender in 1965. The Fender Bass V used the E–A–D–G–C tuning, but was unpopular and discontinued in 1970. The type of low B five-string was created by Jimmy Johnson as a custom instrument in 1975. He bought an E–A–D–G–C 5-string Alembic bass, replaced the nut, and used a new, thick low B string from GHS. Steinberger made a 5-string headless instrument called the L-2/5 in 1982, and later Yamaha offered the first production model as the BB5000 in 1984.
The bass drum (also known as the "kick drum") provides a regular but often-varied foundation to the rhythm. The bass drum is the lowest pitched drum and usually provides the basic beat or timing element with basic pulse patterns. Some drummers may use two or more bass drums or use a double bass drum pedal with a single bass drum. Double bass drumming is an important technique in many heavy metal genres. Using a double bass drum pedal enables a drummer to play a double bass drum style with only one bass drum, saving space in recording/performance areas and reducing time and effort during set-up, taking down, and transportation.
The sound of electronic drums and cymbals themselves is heard by the drummer and possibly other musicians in close proximity, but even so, the foldback (audio monitor) system is usually fed from the electronic sounds rather than the live acoustic sounds. The drums can be heavily dampened (made to resonate less or subdue the sound), and their tuning and even quality is less critical in the latter scenario. In this way, much of the atmosphere of the live performance is retained in a large venue, but without some of the problems associated with purely microphone-amplified drums. Triggers and sensors can also be used in conjunction with conventional or built-in microphones. If some components of a kit prove more difficult to "mike" than others (e.g., an excessively "boomy" low tom), triggers may be used on only the more difficult instruments, balancing out a drummer's/band's sound in the mix.
Maybe you've already got a specific brand in mind and want to see all the digital pianos they offer. All you have to do is click on the brand on the left hand side of the screen and within a few moments you'll have access to everything that's available. For that matter, you can always play is safe and stick to the top-rated items…and there are plenty of those in this selection.