Several colleges offer electric bass training in the US. The Bass Institute of Technology (BIT) in Los Angeles was founded in 1978, as part of the Musician's Institute. Chuck Rainey (electric bassist for Aretha Franklin and Marvin Gaye) was BIT's first director. BIT was one of the earliest professional training program for electric bassists. The program teaches a range of modern styles, including funk, rock, jazz, Latin, and R&B.
William F. Ludwig, Sr., and his brother, Theobald Ludwig, founded the Ludwig & Ludwig Co. in 1909 and patented the first commercially successful bass drum pedal system, paving the way for the modern drum kit. It was the golden age of drum building for many famous drum companies, with Ludwig introducing... "The ornately engraved" Black Beauty Brass Snare drum; Slingerland premiered its Radio King solid-maple shell; Leedy invented the floating drum head & self-aligning lug;& Gretsch originated the three-way tension system of the Gladstone snare drum". Wire brushes for use with drums and cymbals were introduced in 1912. The need for brushes arose due to the problem of the drum sound overshadowing the other instruments on stage. Drummers began using metal fly swatters to reduce the volume on stage next to the other acoustic instruments. Drummers could still play the rudimentary snare figures and grooves with brushes that they would normally play with drumsticks.
A unique effect can be created by striking an open hi-hat (i.e., in which the two cymbals are apart) and then closing the cymbals with the foot pedal; this effect is widely used in disco and funk. The hi-hat has a similar function to the ride cymbal. The two are rarely played consistently for long periods at the same time, but one or the other is used to keep the faster-moving rhythms (e.g., sixteenth notes) much of the time in a song. The hi-hats are played by the right stick of a right-handed drummer. Changing between ride and hi-hat, or between either and a "leaner" sound with neither, is often used to mark a change from one passage to another, for example; to distinguish between a verse and chorus.
In some styles or settings, such as country music clubs or churches, small venues, or when a live recording is being made, the drummer may use a transparent perspex or plexiglas drum screen (also known as a drum shield) to dampen the onstage volume of the drums. A screen that completely surrounds the drum kit is known as a drum booth. In live sound applications, drum shields are used so that the audio engineer can have more control over the volume of drums that the audience hears through the PA system mix or to reduce the overall volume of the drums, as a way to reduce the overall volume of the band in the venue. In some recording studios, foam and fabric baffles are used in addition to or in place of clear panels. The drawback with foam/cloth baffle panels is that the drummer cannot see other performers, the record producer or the audio engineer well.
Sticks were traditionally made from wood (particularly maple, hickory, and oak} but more recently metal, carbon fibre and other exotic materials have been used for high market end sticks. The prototypical wooden drum stick was primarily designed for use with the snare drum, and optimised for playing snare rudiments. Sticks come in a variety of weights and tip designs; 7N is a common jazz stick with a nylon tip, while a 5B is a common wood tipped stick, heavier than a 7N but with a similar profile, and a common standard for beginners. Numbers range from 1 (heaviest) to 10 (lightest).
A number of accessories are designed for the bass drum (also called "kick drum"). Ported tubes for the bass drum are available to take advantage of the bass reflex speaker design, in which a tuned port (a hole and a carefully measured tube) are put in a speaker enclosure to improve the bass response at the lowest frequencies. Bass drumhead patches are available, which protect the drumhead from the impact of the felt beater. Bass drum pillows are fabric bags with filling or stuffing that can be used to alter the tone or resonance of the bass drum. A less expensive alternative to using a specialized bass drum pillow is to use an old sleeping bag.
After spending 29 hours researching 21 models and testing seven with a panel of professional and amateur pianists, we think the Casio Privia PX-160 is the best budget digital piano for beginners. It suitably replicates the feel of an acoustic piano and has some of the most realistic sounds we’ve heard in this price category, and its dual headphone outputs accommodate both student and teacher.
In some styles of music, drummers use electronic effects on drums, such as individual noise gates that mute the attached microphone when the signal is below a threshold volume. This allows the sound engineer to use a higher overall volume for the drum kit by reducing the number of "active" mics which could produce unwanted feedback at any one time. When a drum kit is entirely miked and amplified through the sound reinforcement system, the drummer or the sound engineer can add other electronic effects to the drum sound, such as reverb or digital delay.
A common feature of more expensive basses is "neck-through" construction. Instead of milling the body from a single piece of wood (or "bookmatched" halves) and then attaching the neck into a pocket (so-called "bolt-on" design), neck-through basses are constructed first by assembling the neck, which may comprise one, three, five or more layers of wood in vertical stripes, which are longer than the length of the fretboard. To this elongated neck, the body is attached as two wings, which may also be made up of several layers. The entire bass is then milled and shaped. Neck-through construction advertisements claim this approach provides better sustain and a mellower tone than bolt-on neck construction. While neck-through construction is most common in handmade "boutique" basses, some models of mass-produced basses such as Ibanez's BTB series also have neck-through construction. Bolt-on neck construction does not necessarily imply a cheaply made instrument; virtually all traditional Fender designs still use bolt-on necks, including its high-end instruments costing thousands of dollars, and many boutique luthiers such as Sadowsky build bolt-on basses as well as neck-through instruments.
In the very smallest kits, in jazz, and at very high volumes, ride cymbals may be played in with the technique and sound of a crash cymbal. Some hi-hats will also give a useful crash, particularly thinner hats or those with an unusually severe taper. At low volumes, producing a good crash from a cymbal not particularly suited to it is a highly skilled art. Alternatively, specialised crash/ride and ride/crash cymbals are specifically designed to combine both functions.
One of the main things to consider when looking at a 4-string bass (and every bass for that matter) is the material used to make its body. Bass guitars are traditionally made of different varieties of wood and feature a solid, hard-bodied design. Alder is a favorite amongst musicians because it produces a clear, full-bodied sound. For warmer, smoother tones, a mahogany bass might be the one for you. Another aspect to look into is a fretted or fretless electric bass guitar. On a fretted bass, the frets divide the fingerboard into semi tone divisions. These models make learning the bass easier because you have a guide for finger placement. Fretless basses offer a different sound because without frets the strings are directly pressed into the wood of the neck. This produces a softer sound because the string is in direct contact with the musician's finger and also allows you to slide up and down the neck with ease. The electric bass guitar is said to be the cornerstone of the band. It establishes the beat and brings a booming, punchy sound to the music. From Flea of the Red Hot Chili Peppers to Paul McCartney of the Beatles, musicians have been playing the bass for decades in modern, mainstream music groups. No matter what skill level you're at right now, these is certainly an electric bass guitar that will meet and exceed all your sound and style needs.
Over the decades, the possibilities of what a musician can do with a digital piano have grown tremendously. With technology advancing by the second, players are discovering new, innovative ways to manipulate their sound - even beyond the use of volume, expression and sustain pedals. MIDI (short for Musical Instrument Digital Interface) was introduced in the early 1980s and allows digital pianists to connect their instrument to a computer so it can control (or be controlled by) other sequencers and instruments. MIDI digital pianos often have a disk drive to upload other MIDI data. Common effects and instruments that MIDI can offer are: tremolo, phasers, chorus, stringed instruments and drum sounds. Digital Pianos (including models with MIDI connection) are offered by many respected musical instrument brands, with Williams and Yamaha being among the most popular.
Maybe you're looking for something a bit more conspicuous, that you can make into the centerpiece of your music room? If so, you'll want to investigate options like the Yamaha Arius YDP-142 and Suzuki Micro Grand Digital Piano. These advanced instruments sound every bit as gorgeous as they look, and they offer the ability to record your and store your performances to listen again later or even to playback as accompaniments.