The 88-key Yamaha YPG-535 Portable Grand Piano Keyboard offers you great-feeling graded soft-touch action atop a sturdy, good-looking built-in stand. Its Performance Assistance Technology ensures the Yamaha YPG-535 delivers error-free performances. And the digital piano’s music database provides complete keyboard setups organized by song title. Learn More
Fender's Bass Guitar is right at the top of the market, thanks to its robust, buzz-free sound and excellent playability. It features a classic light wood finish that looks great and a graphite-reinforced neck. It also comes with responsive, lightweight tuning pegs that won't slide out of tune easily, as well as a real high-quality bridge that doesn't buzz.
Depending on the individual features of each digital piano, they may include many more instrument sounds other than regular piano samples. Many less expensive or average-priced digital pianos often include basic instruments such as string ensemble, electric piano, organs, harpsichord, guitar, and vibraphone, while a more expensive and advanced digital pianos may have a wider range of instruments such as synthesized sounds, wind instruments, traditional instruments, violins, drums, percussion, and a variety of effects, similar to that of a typical digital keyboard or synthesizer. Some digital pianos may also have a complete set of General MIDI implementation, in addition to the aforementioned basic sounds.
A common feature of more expensive basses is "neck-through" construction. Instead of milling the body from a single piece of wood (or "bookmatched" halves) and then attaching the neck into a pocket (so-called "bolt-on" design), neck-through basses are constructed first by assembling the neck, which may comprise one, three, five or more layers of wood in vertical stripes, which are longer than the length of the fretboard. To this elongated neck, the body is attached as two wings, which may also be made up of several layers. The entire bass is then milled and shaped. Neck-through construction advertisements claim this approach provides better sustain and a mellower tone than bolt-on neck construction. While neck-through construction is most common in handmade "boutique" basses, some models of mass-produced basses such as Ibanez's BTB series also have neck-through construction. Bolt-on neck construction does not necessarily imply a cheaply made instrument; virtually all traditional Fender designs still use bolt-on necks, including its high-end instruments costing thousands of dollars, and many boutique luthiers such as Sadowsky build bolt-on basses as well as neck-through instruments.
Yamaha DGX-660 Portable Digital Piano New from$799.99In Stockor 12 payments of $66.67 Free Ground Shipping Yamaha Arius YDP-143 Digital Home Piano (with Bench) New from$1,099.99In Stockor 12 payments of $91.67 Free Ground Shipping Korg B1 Digital Piano New from$499.99In Stockor 8 payments of $62.50 Free Ground Shipping Casio PX-770 Privia Digital Piano New from$699.00In Stockor 12 payments of $58.25 Free Ground Shipping See All Home Digital Pianos Related Brands
If you want to learn to play the piano, digital pianos offer many benefits compared to acoustic grand pianos. Most digital pianos we sell offer split or dual mode. Engaging this feature separates the keyboard into two identical keyboards with the same notes and octave. This allows you to play along with your piano teacher so they can walk you through chords, melodies and full songs. Select models also offer built-in demo songs with step by step instructions on how to play them.
Six strings are usually tuned B0–E1–A1–D2–G2–C3—like a four-string bass with an additional low B string and a high C string. Some players prefer B0–E1–A1–D2–F♯2–B2, which preserves the intervals of standard six-string guitar tuning (an octave and a fourth lower) and makes the highest and lowest string the same note two octaves apart. While less common than four or five-string basses, they appear in Latin, jazz, and other genres, as well as in studio work where a session musician's single instrument must be highly versatile, and to facilitate sightreading in the recording studio. Alternative tunings for six-string bass include B–E–A–D–G–B, matching the first five strings of an acoustic or electric guitar with an additional low B, and E–A–D–G–B–E, completely matching the tuning of a six-string guitar but one octave lower allowing the use of guitar chord fingerings. Rarer tunings such as E–A–D–G–C–F and F♯–B–E–A–D–G provide a lower or higher range in a given position while maintaining consistent string intervals. In 1974, Anthony Jackson worked with Carl Thompson to create the Contrabass guitar (BEADGC). Later, Jackson brought his ideas to Fodera and worked with Ken Smith to create a wider-spaced Contrabass guitar, which evolved to the modern six-string bass.
The hi-hat cymbals (nicknamed "hats") consist of two cymbals mounted facing each other on a metal pole with folding support legs that keep a hollow support cylinder standing up. Like the bass drum, the hi-hat has a foot pedal. The bottom cymbal is fixed in place. The top cymbal is mounted on a thin pole which is inserted into the hollow cymbal stand cylinder. The thin pole is connected to a foot pedal. When the foot pedal is pressed down, a mechanism causes the thin pole to move down, causing the cymbals to move together. When the foot is lifted off the pedal, the cymbals move apart, due to the pedal's spring-loaded mechanism. The hi-hats can be sounded by striking the cymbals with one or two sticks or just by opening and closing the cymbals with the footpedal, without striking the cymbals. The ability to create rhythms on the hi-hats with the foot alone enables drummers to use both sticks on other drums or cymbals. Different sounds can be created by striking "open hi-hats" (without the pedal depressed, which creates a noisy sound nicknamed "sloppy hats") or a crisp "closed hi-hats" sound (with the pedal pressed down). As well, the high hats can be played with a partially depressed pedal.
In most drum kits and drum/percussion kits cymbals are as important as the drums themselves. The oldest idiophones in music are cymbals, and were used throughout the ancient Near East, very early in the Bronze Age period. Cymbals are most associated with Turkey and Turkish craftsmanship, where Zildjian (the name means cymbal smith) has predominantly made them since 1623.
Jump up ^ "Warren 'Baby' Dodds". The Percussive Arts Society. Archived from the original on 27 September 2011. Retrieved 21 November 2011. Dodds' way of playing press rolls ultimately evolved into the standard jazz ride-cymbal pattern. Whereas many drummers would play very short press rolls on the backbeats, Dodds would start his rolls on the backbeats but extend each one to the following beat, providing a smoother time flow.
Prior to the development of the drum set, drums and cymbals used in military and orchestral music settings were played separately by different percussionists; if the score called for bass drum, triangle and cymbals, three percussionists would be hired to play these three instruments. In the 1840s, percussionists began to experiment with foot pedals as a way to enable them to play more than one instrument, but these devices would not be mass-produced for another 75 years. By the 1860s, percussionists started combining multiple drums into a set. The bass drum, snare drum, cymbals, and other percussion instruments were all struck with hand-held drum sticks. Drummers in musical theater shows and stage shows, where the budget for pit orchestras was often limited, contributed to the creation of the drum set by developing techniques and devices that would enable them to cover the roles of multiple percussionists.
In a jazz setting, the electric bass tends to have a much more expansive solo role than in most popular styles. In most rock settings, the bass guitarist may only have a few short bass breaks or brief solos during a concert. During a jazz concert, a jazz bassist may have a number of lengthy improvised solos, which are called "blowing" in jazz parlance. Whether a jazz bassist is comping (accompanying) or soloing, they usually aim to create a rhythmic drive and "timefeel" that creates a sense of "swing" and "groove". For information on notable jazz bassists, see the List of jazz bassists article.
"Jazz" pickups (referring to the original Fender Jazz Bass), also referred to as "J pickups", are wider eight-pole pickups that lie underneath all four strings. J pickups are typically single-coil designs, though there are a large number of humbucking designs. Traditionally, two of them are used, one of them near the bridge and another closer to the neck. As with the halves of P-pickups, the J-pickups are reverse-wound with reverse magnetic polarity. As a result, they have hum canceling properties when used at the same volume, with hum cancellation decreasing when the pickups are at unequal volume, and absent if the player uses only one pickup. 'J' Style pickups tend to have a lower output and a thinner sound than 'P' Style pickups. Many bassists combine a 'J' pickup at the bridge and a 'P' pickup at the neck, so they can blend the two sounds.
If our top pick isn’t available or you’re looking to save $50, the Yamaha P-45 is an excellent alternative. It was the favorite of one panelist, and the other three each ranked it second. It plays as well as our top pick, although I found the key weight to be a bit heavy for my tastes; it took a little more finger effort to play. Jack liked that heavier feel but could see it causing problems for beginners. Brent thought the action was about as good as it gets in this price range, and Liz thought it was easy to play.
Popular music bands and rock groups use the bass guitar as a member of the rhythm section, which provides the chord sequence or "progression" and sets out the "beat" for the song. The rhythm section typically consists of a rhythm guitarist or electric keyboard player, or both, a bass guitarist and a drummer; larger groups may add additional guitarists, keyboardists, or percussionists.
In 1953, following Fender's lead, Gibson released the first short scale violin-shaped electric bass, with an extendable end pin so a bassist could play it upright or horizontally. Gibson renamed the Electric Bass in 1958 to the EB-1. Also in 1958 Gibson released the maple arched top EB-2 described in the Gibson catalogue as "A hollow-body electric bass that features a Bass/Baritone pushbutton for two different tonal characteristics". In 1959 these were followed by the more conventional-looking EB-0 Bass. The EB-0 was very similar to a Gibson SG in appearance (although the earliest examples have a slab-sided body shape closer to that of the double-cutaway Les Paul Special).
The late Bernard Edwards, bass player with the Disco group Chic, was known to use a technique called chucking to pluck the bass strings with the forefinger of his right hand, in a manner similar to how strings are plucked with a plectrum.[not in citation given] Chucking uses the soft part of the forefinger and the nail of the forefinger to alternately strike the string in an up-down manner. The thumb supports the forefinger at the first joint, as though using an invisible plectrum. With a flexible wrist action, chucking facilitates rapid rhythmic sequences of notes played on different strings, particular notes that are an octave apart. Chucking is distinguished from plucking in that the attack is softer with a sound closer to that produced by the use of fingers. Chucking allows a mix of plucking and finger techniques on a given song, without having to take up or put down a plectrum. Examples of Edwards’ use of chucking on his Music Man Stingray bass can be heard on the intro and solo section of "Everybody Dance" and the foundation bass line of "Dance Dance Dance".
Sample-based digital pianos do have limitations on the faithfulness with which they reproduce the sound of an acoustic piano. These might include the lack of implementation of harmonic tones that result when certain combinations of notes are sounded, limited polyphony, and a lack of natural reverberation when the instrument is played percussively. They often lack the incidental acoustic noises associated with piano playing, such as the sounds of pedals being depressed and the associated machinery shifting within the piano, which some actually consider a benefit. These limitations apply to most acoustic instruments and their sampled counterparts, the difference often being described as "visceral". On an acoustic piano, the sustain pedal lifts the dampers for all strings, allowing them to resonate naturally with the notes played. Digital pianos all have a similar pedal switch to hold notes in suspension, but only high-end models can reproduce the sympathetic resonance effect.