First and foremost, it's hard to go wrong with the classics. Fender can definitely take the credit for making the bass guitar the instrument it is today, and with a Precision Bass or Jazz Bass from Fender or Squier, you can experience the sound and feel that laid the groundwork for all others. Of course, what those others have done with the bass guitar is nothing short of amazing, and you'll also find plenty of artisan axes here from the likes of Schecter, Rickenbacker, Warwick and more. The bottom line is choice: there's a bass to satisfy any player.
The string can be plucked (or picked) at any point between the bridge and the point where the fretting hand is holding down the string on the fingerboard; different timbres (tones) are produced depending on where along the string it is plucked. When plucked closer to the bridge, the string's harmonics are more pronounced, giving a brighter tone. Closer to the middle of the string, these harmonics are less pronounced, giving a more mellow, darker tone.
"Precision" pickups (which refers to the Fender Precision Bass), also referred to as "P pickups", are two distinct single-coil pickups. Each is offset a small amount along the length of the body so that each half is underneath two strings. The pickups are reverse-wound with reversed magnetic polarity to reduce unwanted hum. This makes the 'P' pickup a humbucking single coil pickup. Less common is the "single-coil P" pickup, used on the original 1951 Fender Precision bass. P-style pickups are generally placed in the "neck" or "middle" position, but some luthiers and performers have used P pickups in the bridge position, or in between two jazz pickups.
Jump up ^ Information on Dodds is found in his own contemporary journals/biography "The Baby Dodds Story" -Louisiana State University Press, 1992, and by contemporary witness- drummer Gearge Wettling, who confirms Dodds was the first drummer to also keep the now-famous broken-triplet beat that became the standard pulse/roll of what we call ride cymbal playing.
The slap and pop method, or "thumbstyle", most associated with funk, uses tones and percussive sounds achieved by striking, thumping, or "slapping" a string with the thumb and snapping (or "popping") a string or strings with the index or middle fingers. Bassists often interpolate left hand-muted "ghost notes" between the slaps and pops to achieve a rapid percussive effect, and after a note is slapped or popped, the fretting hand may cause other notes to sound by using "hammer-ons", "pull-offs", or a left-hand glissando (slide). Larry Graham of Sly and the Family Stone and Graham Central Station was an early innovator of the slap style, and Louis Johnson of The Brothers Johnson is also credited as an early slap bass player.
These are a sub-type of traditional digital pianos that offers a more classical design which closely resemble an acoustic upright piano. Upright digital pianos are mainly intended for home use, and is usually more expensive than the other types. Some models, especially the higher-end ones, often feature an actual wooden keys as opposed to regular plastic keybed.
Although there are far fewer university programs that offer electric bass instruction in jazz and popular music, some universities offer bachelor's degrees (B.Mus.) and Master of Music (M.Mus.) degrees in jazz performance or "commercial music", where electric bass can be the main instrument. In the US, the Manhattan School of Music has a jazz program leading to B.Mus. and M.Mus degrees that accepts students who play bass (double bass and electric bass), guitar, piano, drums, and melody instruments (e.g., saxophone, trumpet, etc.).
No matter how you choose to distinguish yourself - acoustic-electric, custom, signature model, extended range or the tried-and-true standbys - one thing that will never change is that music is a personal thing. Only you can decide which bass guitar belongs onstage and in the studio with you, so you've got every reason to check out all the instruments here: chances are you'll know the right one when you find it.
In a jazz setting, the electric bass tends to have a much more expansive solo role than in most popular styles. In most rock settings, the bass guitarist may only have a few short bass breaks or brief solos during a concert. During a jazz concert, a jazz bassist may have a number of lengthy improvised solos, which are called "blowing" in jazz parlance. Whether a jazz bassist is comping (accompanying) or soloing, they usually aim to create a rhythmic drive and "timefeel" that creates a sense of "swing" and "groove". For information on notable jazz bassists, see the List of jazz bassists article.
Other design options include finishes, such as lacquer, wax and oil; flat and carved designs; luthier-produced custom-designed instruments; headless basses, which have tuning machines in the bridge of the instrument (e.g., Steinberger and Hohner designs) and several artificial materials such as luthite. The use of artificial materials (e.g., BassLab) allows for unique production techniques such as die-casting, to produce complex body shapes. While most basses have solid bodies, they can also include hollow chambers to increase the resonance or reduce the weight of the instrument. Some basses are built with entirely hollow bodies, which change the tone and resonance of the instrument. Acoustic bass guitars have a hollow wooden body constructed similarly to an acoustic guitar, and are typically equipped with piezoelectric or magnetic pickups and amplified.
ZZOUNDS EMAIL Sign up to receive emails from zZounds, and never miss out on information handpicked for you by our gear experts! SIGN UP FOR EMAILS Electronic Drums Electronic Drum Sets One-Piece Electronic Drums Electronic Drum Modules Electronic Drum Triggers See More Acoustic Drum Sets 3-Piece Acoustic Drum Sets 4-Piece Acoustic Drum Sets 5-Piece Acoustic Drum Sets 6-Piece Acoustic Drum Sets See More Drum Hardware Bass Drum Pedals Drum Hardware Packages Cymbal Stands Drum Thrones See More Cymbals Cymbal Packs Hi-Hat Cymbals Crash Cymbals Ride Cymbals See More Drum Accessories Drum Sticks Drum Heads Drum Cases Drum Bags See More Other Drums and Percussion Congas Bongos Tambourines Cajons See More Snare Drums Acrylic Snare Drums Wood Snare Drums Metal Snare Drums Floor and Rack TomsBass DrumsDrum Books, Videos, and CD-ROMs General Drum Books, Videos, and CD-ROMs Drums: See All 1008 Products Customer Kudos "zZounds has always been very helpful and easy to work with. I have bought several instruments and gear from them over the years." - Customer on October 12, 2017 1 MILLION+ Happy Customers learn more Guitar·Bass·Keyboard·Recording·Computer Audio·Live Sound·Drums·DJ·Accessories
By World War I, drum kits were often marching band-style military bass drums with many percussion items suspended on and around them. Drum kits became a central part of jazz music, especially Dixieland. The modern drum kit was developed in the Vaudeville era during the 1920s in New Orleans. In 1917, a New Orleans band called "The Original Dixieland Jazz Band " recorded jazz tunes that became hits all over the country. These were the first official jazz recordings. Drummers such as Baby Dodds, "Zutty" Singleton and Ray Bauduc had taken the idea of marching rhythms, combining the bass drum and snare drum and "traps", a term used to refer to the percussion instruments associated with immigrant groups, which included miniature cymbals, tom toms, cowbells and woodblocks. They started incorporating these elements with ragtime, which had been popular for a couple of decades, creating an approach which evolved into a jazz drumming style.
In piano lingo, “action” describes the way the piano keys feel when you press on them. With a digital piano, the closer the action is to that of an acoustic piano, the better. Semi-weighted action uses a spring to create the resistance felt when pressing a key and its rebound when you lift your finger. Hammer action uses a hammer mechanism like that found in an acoustic piano to replicate the feel. Graded, or progressive, hammer action takes that a step further by increasing the weight of the action as you descend to the lower notes on the keyboard. Using a keyboard with weighted action is beneficial for multiple reasons. It helps build finger strength while practicing (a spring-based action will only minimally address this), and it allows for more variation and musicality in the way you play a note. While a piano keyboard might look like nothing more than a bunch of on/off switches, in reality there’s a range of volumes and timbres that can be achieved depending on how quickly or strongly you depress the keys. Hammer action best replicates those possibilities.
Bassists trying to emulate the sound of a double bass sometimes pluck the strings with their thumb and use palm-muting to create a short, "thumpy" tone. Monk Montgomery (who played in Lionel Hampton's big band) and Bruce Palmer (who performed with Buffalo Springfield) use thumb downstrokes. The use of the thumb was acknowledged by early Fender models, which came with a "thumbrest" or "Tug Bar" attached to the pickguard below the strings. Contrary to its name, this was not used to rest the thumb, but to provide leverage while using the thumb to pluck the strings. The thumbrest was moved above the strings in 1970s models (as a true thumbrest) and eliminated in the 1980s. Nevertheless, some reissued versions of vintage Fender basses in the 2010s do include a thumbrest.
The 88-key Yamaha YPG-535 Portable Grand Piano Keyboard offers you great-feeling graded soft-touch action atop a sturdy, good-looking built-in stand. Its Performance Assistance Technology ensures the Yamaha YPG-535 delivers error-free performances. And the digital piano’s music database provides complete keyboard setups organized by song title. Learn More
What started as a simple string and pedal sales catalog has grown exponentially over the past thirty years. The early days were a time where catalogs didn't have much of a presence in the industry, but what began as a college dorm room operation grew rapidly. In 1986 we moved to a full product offering and 64-page catalog, which over the years has grown to 162 pages. Join the AMS family and get your free catalog now!
There are several reasons for this division. When more than one band plays in a single performance, the drum kit is often considered part of the backline (the key rhythm section equipment that stays on stage all night, which often also includes bass amps and a stage piano), and is shared between/among the drummers. Oftentimes, the main "headlining" act will provide the drums, as they are being paid more, possibly have the better gear, and in any case have the prerogative of using their own. Sticks, snare drum and cymbals, and sometimes other components, are commonly swapped though, each drummer bringing their own. The term breakables in this context refers to whatever basic components the "guest" drummer is expected to bring. Similar considerations apply if using a "house kit" (a drum kit owned by the venue, which is rare), even if there is only one band at the performance.
The second biggest factor that affects drum sound is head tension against the shell. When the hoop is placed around the drum head and shell and tightened down with tension rods, the tension of the head can be adjusted. When the tension is increased, the amplitude of the sound is reduced and the frequency is increased, making the pitch higher and the volume lower.
Snare drum and tom-tom Typical ways to muffle a snare or tom include placing an object on the outer edge of the drumhead. A piece of cloth, a wallet, gel, or fitted rings made of mylar are common objects. Also used are external clip-on muffles that work using the same principle. Internal mufflers that lie on the inside of the drumhead are often built into a drum, but are generally considered less effective than external muffles, as they stifle the initial tone, rather than simply reducing the sustain of it.