The first fretless bass guitar was made by Bill Wyman in 1961 when he converted a used UK-built ‘Dallas Tuxedo’ bass by removing the frets and filling in the slots with wood putty. The first production fretless bass was the Ampeg AUB-1 introduced in 1966, and Fender introduced a fretless Precision Bass in 1970. Around 1970, Rick Danko from The Band began to use an Ampeg fretless, which he modified with Fender pickups—as heard on the 1971 Cahoots studio album and the Rock of Ages album recorded live in 1971. Danko said, "It's a challenge to play fretless because you have to really use your ear." In the early 1970s, fusion-jazz bassist Jaco Pastorius had the fingerboard of his de-fretted Fender Jazz Bass coated in epoxy resin, allowing him to use roundwound strings for a brighter sound. Some fretless basses have "fret line" markers inlaid in the fingerboard as a guide, while others only use guide marks on the side of the neck.
In the 2010s, some drummers use a variety of auxiliary percussion instruments, found objects, and electronics as part of their "drum" kits. Popular electronics include: electronic sound modules; laptop computers used to activate loops, sequences and samples; metronomes and tempo meters; recording devices; and personal sound reinforcement equipment (e.g., a small PA system to amplify electronic drums and provide a monitor).
The bass guitar (also known as electric bass, or bass) is a stringed instrument similar in appearance and construction to an electric guitar, except with a longer neck and scale length, and four to six strings or courses. The four-string bass is usually tuned the same as the double bass, which corresponds to pitches one octave lower than the four lowest pitched strings of a guitar (E, A, D, and G). The bass guitar is a transposing instrument, as it is notated in bass clef an octave higher than it sounds. It is played primarily with the fingers or thumb, by plucking, slapping, popping, strumming, tapping, thumping, or picking with a plectrum, often known as a pick. The electric bass guitar has pickups and must be connected to an amplifier and speaker, to be loud enough to compete with other instruments.
Bass drum Muffling the bass can be achieved with the same muffling techniques as the snare, but bass drums in a drum kit are more commonly muffled by adding pillows, a sleeping bag or another soft filling inside the drum, between the heads. Cutting a small hole in the resonant head can also produce a more muffled tone, and allows manipulation in internally placed muffling. The Evans EQ pad places a pad against the batterhead and, when struck, the pad moves off the head momentarily, then returns to rest against the head, thus reducing the sustain without choking the tone.
Jump up ^ Information on Dodds is found in his own contemporary journals/biography "The Baby Dodds Story" -Louisiana State University Press, 1992, and by contemporary witness- drummer Gearge Wettling, who confirms Dodds was the first drummer to also keep the now-famous broken-triplet beat that became the standard pulse/roll of what we call ride cymbal playing.
A fully electronic kit is also easier to soundcheck than acoustic drums, assuming that the electronic drum module has levels that the drummer has pre-set in her/his practice room; in contrast, when an acoustic kit is sound checked, most drums and cymbals need to be miked and each mic needs to be tested by the drummer so its level and tone equalization can be adjusted by the sound engineer. As well, even after all the individual drum and cymbal mics are soundchecked, the engineer needs to listen to the drummer play a standard groove, to check that the balance between the kit instruments is right. Finally, the engineer needs to set up the monitor mix for the drummer, which the drummer uses to hear her/his instruments and the instruments and vocals of the rest of the band. With a fully electronic kit, many of these steps could be eliminated.
Looking for complete drum sets for the drummer in your life? You’ll feel like a king when you sit at the throne of a new five-piece drum set from one of the industry’s most popular brands, such as Pearl, Tama, Mapex, and more. We even offer all the extra bells and whistles so you can start rocking away. Find all the drum accessories you need, from double bass pedals, cymbals, and triangles, to replacement drum heads, drum stools, and stands. When you need more cow bell, or your intense, gut-busting, around-the-world drum fills break the heads off of your sticks, be sure to stock up on replacement sticks and other drum accessories.
The bass guitars will have either 4, 5 or 6 strings. Though it may be tempting to go for the guitar with 6 strings, going for the 4-stringed is good for a new player. A bass guitar is a type of stringed instrument that plays a lower tone and sounds more impressive than a regular guitar. The most notable difference is that a bass guitar may have as few as four strings and they are much thicker. The thicker strings are what give the bass its low tone.
The smallest and largest drums without snares, octobans and gong drums respectively, are sometimes considered toms. The naming of common configurations (four-piece, five-piece, etc.) is largely a reflection of the number of toms, as only the drums are conventionally counted, and these configurations all contain one snare and one or more bass drums, (though not regularly any standardized use of 2 bass/kick drums) the balance usually being in toms.
Bass guitars require a bass amp. It is possible to play a guitar through a bass amp, but you cannot play a bass through a guitar amp without damaging the amp. Amplifying low-frequency sounds is more challenging and requires both different equipment and more space compared to an ordinary guitar's amplification needs. Like guitar amps, bass amps can be combined or separated into the head and the speaker.
No matter how you choose to distinguish yourself - acoustic-electric, custom, signature model, extended range or the tried-and-true standbys - one thing that will never change is that music is a personal thing. Only you can decide which bass guitar belongs onstage and in the studio with you, so you've got every reason to check out all the instruments here: chances are you'll know the right one when you find it.
Drum HeadsEvans Black DrumheadSee More Drum HeadsDrum SticksVic Firth American Classic 5A DrumsticksSee More Drum SticksDrum CasesSKB Drum CasesSee More Drum CasesDrum SilencersHQ Percussion Sound Off Drum Mute PackageSee More Drum SilencersDrum BagsProtection Racket Drum BagsSee More Drum BagsPractice PadsDrum Workshop Go Anywhere Practice Pad SetSee More Practice PadsSee All Drum Accessories
N 092 Limited series Heavy Google it The man behind this snare drum has been the official drum tech for John Bonham and recently Cindy Blackman of Santana’s fame A generously loud snare Amazing attack and response to any dynamic level Own a piece of history No longer made Offers considered Would prefer to sell locally but will ship of course if sold on ebay Sorry trades are not accepted here We have info on this and many other snares on the official 247drums store
Chords are not used that often by electric bass players. However, in some styles, bassists may sound "double stops", such as octaves with open strings and powerchords. In Latin music, double stops with fifths are used. Robert Trujillo of Metallica is known for playing "massive chords"  and "chord-based harmonics"  on the bass. Lemmy of Motörhead often played power chords in his bass lines.
In the jazz scene, since the bass guitar takes on much of the same role as the double bass—laying down the rhythm, and outlining the harmonic foundation—electric bass players have long used both bass guitar methods and jazz double bass method books. The use of jazz double bass method books by electric bass players in jazz is facilitated in that jazz methods tend to emphasize improvisation techniques (e.g., how to improvise walking basslines) and rhythmic exercises rather than specific ways of holding or plucking the instrument.
Prior to the invention of tension rods, drum skins were attached and tuned by rope systems—as on the Djembe—or pegs and ropes such as on Ewe Drums. These methods are rarely used today, though sometimes appear on regimental marching band snare drums. The head of a talking drum, for example, can be temporarily tightened by squeezing the ropes that connect the top and bottom heads. Similarly, the tabla is tuned by hammering a disc held in place around the drum by ropes stretching from the top to bottom head. Orchestral timpani can be quickly tuned to precise pitches by using a foot pedal.
However, contemporary classical composers may also write for the bass guitar to get its unique sound, and in particular its precise and piercing attack and timbre. For example, Steve Reich, explaining his decision to score 2x5 for two bass guitars, stated that, "[With electric bass guitars] you can have interlocking bass lines, which on an acoustic bass, played pizzicato, would be mud."
Detuners, such as the Hipshot, are mechanical devices the player operates with the thumb on the fretting hand to quickly retune one or more strings to a pre-set lower pitch. Hipshots typically drop the E-string down to D on a four-string bass. Rarely, some bassists (e.g., Michael Manring) add detuners to more than one string, or even more than one detuner to each string, so they can retune during a performance and access a wider range of chime-like harmonics.
Electronic drum pads are the second most widely used type of MIDI performance controllers, after electronic music keyboards.:319–320 Drum controllers may be built into drum machines, they may be standalone control surfaces (e.g., rubber drum pads), or they may emulate the look and feel of acoustic percussion instruments. The pads built into drum machines are typically too small and fragile to be played with sticks, and they are usually played with fingers.:88 Dedicated drum pads such as the Roland Octapad or the DrumKAT are playable with the hands or with sticks, and are often built to resemble the general form of a drum kit. There are also percussion controllers such as the vibraphone-style MalletKAT,:88–91 and Don Buchla's Marimba Lumina.
The sound of electronic drums and cymbals themselves is heard by the drummer and possibly other musicians in close proximity, but even so, the foldback (audio monitor) system is usually fed from the electronic sounds rather than the live acoustic sounds. The drums can be heavily dampened (made to resonate less or subdue the sound), and their tuning and even quality is less critical in the latter scenario. In this way, much of the atmosphere of the live performance is retained in a large venue, but without some of the problems associated with purely microphone-amplified drums. Triggers and sensors can also be used in conjunction with conventional or built-in microphones. If some components of a kit prove more difficult to "mike" than others (e.g., an excessively "boomy" low tom), triggers may be used on only the more difficult instruments, balancing out a drummer's/band's sound in the mix.
Heavy metal bass players such as Geezer Butler (Black Sabbath), Alex Webster (Cannibal Corpse), Cliff Burton (Metallica), and Les Claypool (Primus, Blind Illusion) have used chime-like harmonics and rapid plucking techniques in their bass solos. Geddy Lee of Rush has made frequent use of bass solos, such as on the instrumental "YYZ". In both published Van Halen concert videos, Michael Anthony performs unique maneuvers and actions during his solos. Funk bassists such as Larry Graham began using slapping and popping techniques for their solos, which coupled a percussive thumb-slapping technique of the lower strings with an aggressive finger-snap of the higher strings, often in rhythmic alternation. The slapping and popping technique incorporates a large number of muted (or 'ghost' tones) to normal notes to add to the rhythmic effect. Slapping and popping solos were prominent in 1980s pop and R&B, and they are still used by some modern funk and Latin bands.
Much the same considerations apply to bass drum pedals and the stool, but these are not always considered breakables, particularly if changeover time between bands is very limited. Swapping the snare drum in a standard kit can be done very quickly. Replacing cymbals on stands takes longer, particularly if there are many of them, and cymbals are easily damaged by incorrect mounting, so many drummers prefer to bring their own cymbal stands.
Some drummers arrive at the venue with their drum kit and use the mics and mic stands provided by the venue's sound engineer. Other drummers bring their all of their own mics, or selected mics (e.g., a good quality bass drum mic and a good mic for the snare) to ensure that they have good quality mics for each show. In bars and nightclubs, the microphones supplied by the venue can sometimes be in substandard condition, due to the heavy use they experience.
In the 1980s, bass designers continued to explore new approaches. Ned Steinberger introduced a headless bass in 1979 and continued his innovations in the 1980s, using graphite and other new materials and (in 1984) introducing the TransTrem tremolo bar. In 1982, Hans-Peter Wilfer founded Warwick, to make a European bass, as the market at the time was dominated by Asian and American basses. Their first bass was the Streamer Bass, which is similar to the Spector NS. In 1987, the Guild Guitar Corporation launched the fretless Ashbory bass, which used silicone rubber strings and a piezoelectric pickup to achieve an "upright bass" sound with a short 18-inch (457 mm) scale length. In the late 1980s, MTV's "Unplugged" show, which featured bands performing with acoustic instruments, helped to popularize hollow-bodied acoustic bass guitars amplified with piezoelectric pickups built into the bridge of the instrument.
It's a fact that standard drum sets and cymbals are only scratching the surface of what percussion can do. In this section, it's easy to see just how deep your potential is as a drummer with plenty of the usual suspects as well as a ton of more exotic instruments and accessories. If you're ready to bring the rhythms and beats to the stage, you've got thousands of ways right here to make it happen.
The fretting hand—the left hand for right-handed bass players and right hand for left-handed bass players—presses down the strings to play different notes and shape the tone or timbre of a plucked or picked note. One fretting technique is a finger per fret, where each finger in the fretting hand plays one fret in a given position, giving the advantage that full chromatic scale of over an octave and a half can be played with no up-down wrist movement. Also, the double bass-style technique can be used for fretting. This technique involves using four fingers in the space of three frets, especially in the lower positions (i.e., the fretting positions closer to the nut, where the space between notes is the widest). When considering the spacing between notes, this is a comfortable distance for the average person's hand size, however it requires more up-down hand movements. The main advantage of the "four fingers in three frets technique is less tendon strain, leading to a diminished likelihood of Repetitive Strain Injury (RSI). The image below (of a bassist performing tapping) shows the four-in-three.
Portable digital pianos, for the sake of lower production cost, were often equipped with a less complex system for the weighted keys. As a result, the feel of the keys is usually much less realistic than other digital pianos. However, it still retain the emulated weight mechanism (lower keys are heavier than higher ones), though not as precise as more expensive pianos. However, certain models include synthetic ivory-like keys as opposed to standard plastic keys.