It's a fact that standard drum sets and cymbals are only scratching the surface of what percussion can do. In this section, it's easy to see just how deep your potential is as a drummer with plenty of the usual suspects as well as a ton of more exotic instruments and accessories. If you're ready to bring the rhythms and beats to the stage, you've got thousands of ways right here to make it happen.
Pearl Corporation is organized and functions as a wholesale distributor of drums, percussion musical instruments and flutes for the United States. The majority of drums and related items are manufactured by Pearl Musical Instrument company and imported directly from company owned factories located in Taiwan and China. The flutes are manufactured in Taiwan and Japan while the latin percussion instruments are manufactured in Thailand. Pearl Corporation is also the exclusive U.S. distributor of Adams timpani and mallet percussion instruments.
The placement of the pickup greatly affects the sound, timbre and tone of the instrument. A pickup near the neck joint emphasizes the fundamental and low-order harmonics and thus produces a deeper, bassier sound, while a pickup near the bridge emphasizes higher-order harmonics and makes a "tighter" or "sharper" sound. Usually basses with multiple pickups allow blending of the output from the pickups, with electrical and acoustical interactions between the two pickups (such as partial phase cancellations) allowing a range of tonal and timbral effects.
I then set out to a few local Los Angeles music stores to get my hands on some keys, talk to the store employees who work around these instruments every day, and start to whittle down the list. After contacting manufacturers to request samples and/or to get suggestions on pianos that might better fit our guidelines (or, in one case, to inform us of a model that was being discontinued), the list was narrowed down to seven keyboards.
The effects, on the other hand, are great, and there are a lot of them: eight different reverbs, eight choruses, and three modulation effects (tremolo, vibrato, or rotary speaker). The keyboard stores your effect settings for each of the 12 sounds in memory, so they’ll be restored when you choose that sound again or turn the keyboard off. These are likely to be less important and useful for a beginner than basic sounds, though effects might appeal to those looking for an inexpensive performance piano.
Three sounds (Grand Piano Concert, Grand Piano Modern, and Elec. Piano 1) have dedicated buttons on the control panel. Selecting any of the other 15 sounds requires the player to press the Function button and a corresponding piano key labeled with the name of the sound, such as Vibraphone or Jazz Organ. The keys used for instrument selection are in the middle of the keyboard, starting at middle C, for easy accessibility. Some other keyboards that use this selection method have the selection keys assigned to the bottom octave of the keyboard, which can make changing sounds a bit more difficult because you have to look and reach down to the far left end of the keyboard. If you have a library of sounds on your computer, the Casio Privia PX-160 can be used as a controller by connecting it to your computer via USB.
The Alesis Recital Pro is $100 less expensive than our runner-up, but it doesn’t sound that way. The built-in sounds are good, and with its touch buttons and LCD readout, the keyboard is the easiest and most intuitive to use of our picks. It doesn’t come with a sustain pedal, so it will require an extra purchase of about $20 to make it fully functional. Although it doesn’t sound quite as good or play quite as well as our main pick, it’s clearly the standout value.
The fretting hand—the left hand for right-handed bass players and right hand for left-handed bass players—presses down the strings to play different notes and shape the tone or timbre of a plucked or picked note. One fretting technique is a finger per fret, where each finger in the fretting hand plays one fret in a given position, giving the advantage that full chromatic scale of over an octave and a half can be played with no up-down wrist movement. Also, the double bass-style technique can be used for fretting. This technique involves using four fingers in the space of three frets, especially in the lower positions (i.e., the fretting positions closer to the nut, where the space between notes is the widest). When considering the spacing between notes, this is a comfortable distance for the average person's hand size, however it requires more up-down hand movements. The main advantage of the "four fingers in three frets technique is less tendon strain, leading to a diminished likelihood of Repetitive Strain Injury (RSI). The image below (of a bassist performing tapping) shows the four-in-three.
In "miking" a drum kit, dynamic microphones, which can handle high sound-pressure levels, are usually used to close-mic drums, which is the predominant way to mic drums for live shows. Condenser microphones are used for overheads and room mics, an approach which is more common with sound recording applications. Close miking of drums may be done using stands or by mounting the microphones on the rims of the drums, or even using microphones built into the drum itself, which eliminates the need for stands for these microphones, reducing both clutter and set-up time, as well as isolating them.
Instruments handmade by highly skilled luthiers are becoming increasingly available in the 2010s. Exotic materials in high-end instruments include woods such as bubinga, wenge, ovangkol, ebony, and goncalo alves. Some makers use graphite composite to make lightweight necks More expensive basses often feature exotic woods. For example, Alembic uses cocobolo as a body or top layer material because of its attractive grain. Warwick bass guitars are well known for exotic hardwoods, making most necks out of ovangkol, and fingerboards from wenge or ebony. Some makers use solid bubinga bodies for their tonal and aesthetic qualities.
The bass guitarist sometimes breaks out of the strict rhythm section role to perform bass breaks or bass solos. The types of bass lines used for bass breaks or bass solos vary by style. In a rock band, a bass break may consist of the bassist playing a riff or lick during a pause in the song. In some styles of metal, a bass break may consist of "shred guitar"-style tapping on the bass. In a funk or funk rock band, a bass solo may showcase the bassist's percussive slap and pop playing. In genres such as progressive rock, art rock, or progressive metal, the bass guitar player may play melody lines along with the lead guitar (or vocalist) and perform extended guitar solos.
The drum head has the most effect on how a drum sounds. Each type of drum head serves its own musical purpose and has its own unique sound. Double-ply drumheads dampen high frequency harmonics because they are heavier and they are suited to heavy playing. Drum heads with a white, textured coating on them muffle the overtones of the drum head slightly, producing a less diverse pitch. Drum heads with central silver or black dots tend to muffle the overtones even more. And drum heads with perimeter sound rings mostly eliminate overtones (Howie 2005). Some jazz drummers avoid using thick drum heads, preferring single ply drum heads or drum heads with no muffling. Rock drummers often prefer the thicker or coated drum heads.
If you’re looking for more traditional hand drums, you can travel the world with our assortment of hand drums from all over the world. Djembes are rich-sounding, African drums that can produce a variety of tones. Check out our selection of doumbeks, Arabic drums, usually made of metal, that provide crisp, melodic cracks and pops. Hand drums and other handheld percussions, like tambourines and shakers, are great for impromptu jam sessions and for kids to learn basic rhythms. Our bongos are fun for reliving the glory of the beat poets of the 1950s, or for a foray into the lively musical traditions of salsa, son, or samba.
Most five-piece kits, at more than entry level, also have one or more effects cymbals. Adding cymbals beyond the basic ride, hi-hats and one crash configuration requires more stands in addition to the standard drum hardware packs. Because of this, many higher-cost kits for professionals are sold with little or even no hardware, to allow the drummer to choose the stands and also the bass drum pedal he/she prefers. At the other extreme, many inexpensive, entry-level kits are sold as a five-piece kit complete with two cymbal stands, most often one straight and one boom, and some even with a standard cymbal pack, a stool and a pair of 5A drum sticks. In the 2010s, digital kits are often offered in a five-piece kit, usually with one plastic crash cymbal triggers and one ride cymbal trigger. Fully electronic drums do not produce any acoustic sound beyond the quiet tapping of sticks on the plastic or rubber heads. The trigger-pads are wired up to a synth module or sampler.
Swing drummers such as Max Roach and Kenny Clarke had already deviated from the large marching band-style bass drums, finding that they were too loud and boomy. Bebop drummers continued this trend, and they started trying out smaller bass drum sizes in the drum set. Bebop drummers' experimentations with new drum sizes and new sounds led to the innovative concept of applying the busy "four on the floor" bass drum rhythms to a new larger cymbal called the ride cymbal. By focusing on keeping time on the new ride cymbal instead of the bass drum, the "feel" went from bass drum and hi-hat heavy, to a lighter melodic feel that has been explained as "floating on top of the time". This allowed drummers to express themselves in a more melodic fashion by playing the rhythms used by the guitar, piano and sax players using the new smaller, more focused bass drums and snare. Louie Bellson also assisted in the innovative sizes and sounds of the 1940s drum set by pioneering the use of two bass drums, or the double bass drum kit.
A sizzler is a metal chain or combination of chains that is hung across a cymbal, creating a distinctive metallic sound when the cymbal is struck similar to that of a sizzle cymbal. Using a sizzler is the non-destructive alternative to drilling holes in a cymbal and putting metal rivets in the holes. Another benefit of using a "sizzler" chain is that the chain can be removed and the cymbal will return to its normal sound (in contrast, a cymbal with rivets would have to have the rivets removed). Some sizzlers feature pivoting arms that allow the chains to be quickly raised from the cymbal, or lowered onto it, allowing the effect to be used for some songs and removed for others.
In most implementations, a digital piano produces a variety of piano timbres and usually other sounds as well. For example, a digital piano may have settings for a concert grand piano, an upright piano, a tack piano, and various electric pianos such as the Fender Rhodes, the Wurlitzer, and the DX electric piano. Some digital pianos incorporate other basic "synthesizer" sounds such as string ensemble, for example, and offer settings to combine them with piano.