There are many varieties of picks available, but due to the thicker, heavier strings of the electric bass, bassists tend to use heavier picks than those used for electric guitar, typically ranging from 1.14 mm–3.00 mm (3.00 is unusual). Different materials are used for picks, including plastic, nylon, rubber, and felt, all of which produce different tones. Felt and rubber picks sound closer to a fingerstyle tone.
In the mid-1970s, Alembic and other boutique bass manufacturers, such as Tobias, produced four-string and five-string basses with a low "B" string. In 1975, bassist Anthony Jackson commissioned luthier Carl Thompson to build a six-string bass tuned (low to high) B0, E1, A1, D2, G2, C3. In comparison with a standard four-string bass, Jackson's six-string adds a low B string and a high C string. These 5 and 6-string "extended-range basses" would become popular with session bassists as they reduced the need for re-tuning to alternate detuned configurations like "drop D", and also allowed the bassist to play more notes from the same position on the fretboard with fewer shifts up and down the fingerboard, a crucial benefit for a session player sightreading basslines at a recording session.
The type of shell also affects the sound of a drum. Because the vibrations resonate in the shell of the drum, the shell can be used to increase the volume and to manipulate the type of sound produced. The larger the diameter of the shell, the lower the pitch. The larger the depth of the drum, the louder the volume. Shell thickness also determines the volume of drums. Thicker shells produce louder drums. Mahogany raises the frequency of low pitches and keeps higher frequencies at about the same speed. When choosing a set of shells, a jazz drummer may want smaller maple shells, while a rock drummer may want larger birch shells. For more information about tuning drums or the physics of a drum, visit the external links listed below.
Before buying your first bass guitar, you need to make sure to consider each and every one of the factors above before settling on a specific model you want to buy. As you look at the various models, also make sure that the guitar feels comfortable to you personally as you test it out. Remember, you will be using this bass for a while, so you need to make that sure you are picking the best bass guitar in your budget for you.
The five-piece kit is the full entry-level kit and the most common configuration. It adds a third tom to the bass drum/snare drum/two toms set, making three toms in all. A fusion kit will normally add a 14" tom, either a floor tom or a hanging tom on a stand to the right of the bass drum; in either case, making the tom lineup 10", 12" and 14". Having three toms enables drummers to have a low-pitched, middle-register and higher-pitched tom, which gives them more options for fills and solos.
Some cymbals may be considered effects in some kits but "basic" in another set of components. A swish cymbal may, for example serve, as the main ride in some styles of music, but in a larger kit, which includes a conventional ride cymbal as well, it may well be considered an effects cymbal per se. Likewise, Ozone crashes have the same purpose as a standard crash cymbal, but are considered to be effects cymbals due to their rarity, and the holes cut into them, which provide a darker, more resonant attack.