Cymbals of any type used to provide an accent rather than a regular pattern or groove are known as accent cymbals. While any cymbal can be used to provide an accent, the term is applied more correctly to cymbals for which the main purpose is to provide an accent. Accent cymbals include chime cymbals, small-bell domed cymbals or those with a clear sonorous/oriental chime to them like specialized crash and splash cymbals and many china types too, particularly the smaller or thinner ones.
The Yamaha falls a bit short on sound quality, though. It offers 10 sounds, but as Brent (who owns a P-45) put it, only three are usable: Grand Piano 1, Electric Piano 1, and Vibraphone. The Grand Piano 1 sound is the only one that has a button on the console for selection (it doubles as the Function button). The others are selected the same way as with the Casio—with a hold of the Function button and the press of a piano key—but the sounds are all assigned to the lowest octave on the keyboard, so you have to look and reach to the far left of the keyboard to change them.
There are many different types of keyboards available. On the lower end are keyboards that you’d find in a toy store, while music stores have keyboards that are more fully-featured and intended for serious musicians and producers. These types of keyboards are commonly loaded with different voices, tones, rhythms, and sound effects to give a player or producer a lot of control over their sound. Within this type of keyboard, you’ll find synthesizers and MIDI controllers. Another differentiator among keyboards is the number of keys. Some keyboards have fewer than the traditional 88 keys you’d find on a digital piano. This allows certain keyboards to be more compact and generally doesn’t impact the ability for the player to create music. While some keyboards have keys that are weighted, many do not. This means that keyboards do not move or react like piano keys.
Some bassists use other types of tuning to extend the range or get other benefits, such as providing multiple octaves of notes at any given position, or a larger tonal range. Instrument types or tunings used for this purpose include basses with fewer than four strings (one-string bass guitars, two-string bass guitars, three-string bass guitars [tuned to E–A–D]) and alternative tunings (e.g., tenor bass).
I have been playing piano since the early 1980s, and I earned a Bachelor of Music with an audio production and piano focus from Ithaca College as well as a Masters in Music in keyboard collaborative arts from the University of Southern California. For the past 20 years, I’ve been a professional music director and have performed myriad musical styles on different instruments in concert halls and on nightclub stages. I also taught music for 10 years at a private Los Angeles middle and high school.
In addition to the keyboard by itself, there are different bundles available on Amazon. A Beginners Bundle includes the CS-67 stand, SP-33 pedal board, CB7 bench, and a polish cloth. The Essentials Bundle comes with a padded bench, X-stand (not a double-X like we recommend), and a pair of headphones. It’s nice that the bundles are there, but I’d suggest buying things separately to make sure you get what you need and nothing unnecessary.
The fretting hand—the left hand for right-handed bass players and right hand for left-handed bass players—presses down the strings to play different notes and shape the tone or timbre of a plucked or picked note. One fretting technique is a finger per fret, where each finger in the fretting hand plays one fret in a given position, giving the advantage that full chromatic scale of over an octave and a half can be played with no up-down wrist movement. Also, the double bass-style technique can be used for fretting. This technique involves using four fingers in the space of three frets, especially in the lower positions (i.e., the fretting positions closer to the nut, where the space between notes is the widest). When considering the spacing between notes, this is a comfortable distance for the average person's hand size, however it requires more up-down hand movements. The main advantage of the "four fingers in three frets technique is less tendon strain, leading to a diminished likelihood of Repetitive Strain Injury (RSI). The image below (of a bassist performing tapping) shows the four-in-three.
However, contemporary classical composers may also write for the bass guitar to get its unique sound, and in particular its precise and piercing attack and timbre. For example, Steve Reich, explaining his decision to score 2x5 for two bass guitars, stated that, "[With electric bass guitars] you can have interlocking bass lines, which on an acoustic bass, played pizzicato, would be mud."
When playing bass solos, rock and metal bassists sometimes use effects such as fuzz bass or a wah-wah pedal to produce a more pronounced sound. Notably, Cliff Burton of Metallica used both effects. Due to the lower range of the bass, bass guitar solos usually have a much lighter accompaniment than solos for other instruments. In some cases, the bass guitar solo is unaccompanied, or accompanied only by the drums.
The meanings of both numbers and letters vary from manufacturer to manufacturer, and some sticks are not described using this system at all, just being known as Smooth Jazz (typically a 7N or 9N) or Speed Rock (typically a 2B or 3B) for example. Many famous drummers endorse sticks made to their particular preference and sold under their signature. Besides drumsticks, drummers will also use brushes and rutes in jazz and similar softer music. More rarely, other beaters such as cartwheel mallets (known to kit drummers as "soft sticks") may be used. It is not uncommon for rock drummers to use the "wrong" (butt) end of a stick for a heavier sound; some makers produce tipless sticks with two butt ends.
Detuners, such as the Hipshot, are mechanical devices the player operates with the thumb on the fretting hand to quickly retune one or more strings to a pre-set lower pitch. Hipshots typically drop the E-string down to D on a four-string bass. Rarely, some bassists (e.g., Michael Manring) add detuners to more than one string, or even more than one detuner to each string, so they can retune during a performance and access a wider range of chime-like harmonics.
Pearl Corporation is organized and functions as a wholesale distributor of drums, percussion musical instruments and flutes for the United States. The majority of drums and related items are manufactured by Pearl Musical Instrument company and imported directly from company owned factories located in Taiwan and China. The flutes are manufactured in Taiwan and Japan while the latin percussion instruments are manufactured in Thailand. Pearl Corporation is also the exclusive U.S. distributor of Adams timpani and mallet percussion instruments.
For young children, parents are often inclined to start with a keyboard because they can be the least expensive. To decide whether or not this course of action is right for a young student, it’s good to have a conversation with that student’s music teacher. Often, music teachers would prefer that a child starts with a digital piano because they are going to have the requisite number of weighted keys and fewer distracting options. When a child learns to play on a keyboard, they may have a harder time adjusting to a digital or traditional piano. Music teachers also have preferences for which digital pianos they think are going to offer the best balance of sound and cost, and their experience with a particular instrument can certainly be helpful as your child learns. For these reasons, it’s always best to talk to a child’s music teacher before making a purchase. If your child has expressed an interest in learning to play the keyboard specifically, less expensive keyboards with fewer features can be a good place to start.
There are a range of different string types including all-metal strings, which are available in many varieties of winding or finishing, each of which produce different tone, including roundwound, flatwound, halfwound, ground wound, and pressure wound); as well as metal strings with different coverings, such as tapewound and wound with plastic coatings. The variety of materials used in the strings gives bass players a range of tonal options. In the 1950s and early 1960s, bassists mostly used flatwound strings with a smooth surface, which had a smooth, damped sound reminiscent of a double bass. In the late 1960s and 1970s, players began using roundwound bass strings, which produce a brighter tone similar to steel guitar strings, though flatwounds also remained in use by players seeking a vintage tone. Roundwounds have a brighter timbre (tone) with longer sustain than flatwounds.
The first fretless bass guitar was made by Bill Wyman in 1961 when he converted a used UK-built ‘Dallas Tuxedo’ bass by removing the frets and filling in the slots with wood putty. The first production fretless bass was the Ampeg AUB-1 introduced in 1966, and Fender introduced a fretless Precision Bass in 1970. Around 1970, Rick Danko from The Band began to use an Ampeg fretless, which he modified with Fender pickups—as heard on the 1971 Cahoots studio album and the Rock of Ages album recorded live in 1971. Danko said, "It's a challenge to play fretless because you have to really use your ear." In the early 1970s, fusion-jazz bassist Jaco Pastorius had the fingerboard of his de-fretted Fender Jazz Bass coated in epoxy resin, allowing him to use roundwound strings for a brighter sound. Some fretless basses have "fret line" markers inlaid in the fingerboard as a guide, while others only use guide marks on the side of the neck.
William F. Ludwig, Sr., and his brother, Theobald Ludwig, founded the Ludwig & Ludwig Co. in 1909 and patented the first commercially successful bass drum pedal system, paving the way for the modern drum kit. It was the golden age of drum building for many famous drum companies, with Ludwig introducing... "The ornately engraved" Black Beauty Brass Snare drum; Slingerland premiered its Radio King solid-maple shell; Leedy invented the floating drum head & self-aligning lug;& Gretsch originated the three-way tension system of the Gladstone snare drum". Wire brushes for use with drums and cymbals were introduced in 1912. The need for brushes arose due to the problem of the drum sound overshadowing the other instruments on stage. Drummers began using metal fly swatters to reduce the volume on stage next to the other acoustic instruments. Drummers could still play the rudimentary snare figures and grooves with brushes that they would normally play with drumsticks.
Depending on the individual features of each digital piano, they may include many more instrument sounds other than regular piano samples. Many less expensive or average-priced digital pianos often include basic instruments such as string ensemble, electric piano, organs, harpsichord, guitar, and vibraphone, while a more expensive and advanced digital pianos may have a wider range of instruments such as synthesized sounds, wind instruments, traditional instruments, violins, drums, percussion, and a variety of effects, similar to that of a typical digital keyboard or synthesizer. Some digital pianos may also have a complete set of General MIDI implementation, in addition to the aforementioned basic sounds.