Digital pianos typically use analog sensors for its keyboard action, as opposed to digital sensors of a regular keyboard and synthesizer. These sensors notably works in a similar way to those used in analog joysticks found on video game controllers, in which they the velocity input is converted from the key movement as well, not just the initial pressure of the key sensor.

In some styles of music, drummers use electronic effects on drums, such as individual noise gates that mute the attached microphone when the signal is below a threshold volume. This allows the sound engineer to use a higher overall volume for the drum kit by reducing the number of "active" mics which could produce unwanted feedback at any one time. When a drum kit is entirely miked and amplified through the sound reinforcement system, the drummer or the sound engineer can add other electronic effects to the drum sound, such as reverb or digital delay.

Drum kit music is either written down in music notation (called "drum parts"), learned and played "by ear", improvised or some combination of some or all three of these methods. Professional session musician drummers and Big Band jazz drummers are often required to read drum parts. Drum parts are most commonly written on a standard five-line staff. In 2016, a special percussion clef is used, while previously the bass clef was used. However, even if the bass or no clef is used, each line and space is assigned an instrument of the kit, rather than to a pitch. In jazz, traditional music, folk music, rock music and pop music, drummers are expected to be able to learn songs by ear (from a recording or from another musician who is playing or singing the song) and improvise. The degree of improvisation differs in different styles. Jazz and jazz fusion drummers may have lengthy improvised solos in every song. In rock music and blues, there are also drum solos in some songs, although they tend to be shorter than those in jazz. Drummers in all popular music and traditional music styles are expected to be able to improvise accompaniment parts to songs, once they are told the genre or style (e.g., shuffle, ballad, slow blues, etc.).
In the 2010s, some drummers use a variety of auxiliary percussion instruments, found objects, and electronics as part of their "drum" kits. Popular electronics include: electronic sound modules; laptop computers used to activate loops, sequences and samples; metronomes and tempo meters; recording devices; and personal sound reinforcement equipment (e.g., a small PA system to amplify electronic drums and provide a monitor).

Electronic drum pads are the second most widely used type of MIDI performance controllers, after electronic music keyboards.[19]:319–320 Drum controllers may be built into drum machines, they may be standalone control surfaces (e.g., rubber drum pads), or they may emulate the look and feel of acoustic percussion instruments. The pads built into drum machines are typically too small and fragile to be played with sticks, and they are usually played with fingers.[20]:88 Dedicated drum pads such as the Roland Octapad or the DrumKAT are playable with the hands or with sticks, and are often built to resemble the general form of a drum kit. There are also percussion controllers such as the vibraphone-style MalletKAT,[20]:88–91 and Don Buchla's Marimba Lumina.[21]
The late Bernard Edwards, bass player with the Disco group Chic, was known to use a technique called chucking to pluck the bass strings with the forefinger of his right hand, in a manner similar to how strings are plucked with a plectrum.[58][not in citation given] Chucking uses the soft part of the forefinger and the nail of the forefinger to alternately strike the string in an up-down manner. The thumb supports the forefinger at the first joint, as though using an invisible plectrum. With a flexible wrist action, chucking facilitates rapid rhythmic sequences of notes played on different strings, particular notes that are an octave apart. Chucking is distinguished from plucking in that the attack is softer with a sound closer to that produced by the use of fingers. Chucking allows a mix of plucking and finger techniques on a given song, without having to take up or put down a plectrum. Examples of Edwards’ use of chucking on his Music Man Stingray bass can be heard on the intro and solo section of "Everybody Dance" and the foundation bass line of "Dance Dance Dance".
Copyright © 1996-2018 American Musical Supply, Inc. All rights reserved. American Musical Supply reserves the right to correct pricing and/or product specifications in the event of typographical errors found in our print catalog or on our website. If a product is listed at an incorrect price due to such errors or because of inaccurate information received from a supplier, American Musical Supply shall have the right to refuse or cancel any orders placed, whether or not the order has been confirmed and your credit card charged. If your credit card has already been charged for the purchase and your order is canceled, American Musical Supply will issue a credit to your credit card account in the amount of the charge.

The fretting hand can add vibrato to a plucked or picked note, either a gentle, narrow vibrato or a more exaggerated, wide vibrato with bigger pitch variations. For fretted basses, vibrato is always an alternation between the pitch of the note and a slightly higher pitch. For fretless basses, the player can use this style of vibrato, or they can alternate between the note and a slightly lower pitch, as is done with the double bass and on other unfretted stringed instruments. While vibrato is mostly done on "stopped" notes—that is, notes that are pressed down on the fingerboard—open strings can also be vibratoed by pressing down on the string behind the nut. As well, the fretting hand can be used to "bend" a plucked or picked note up in pitch, by pushing or pulling the string so that the note sounds at a higher pitch. To create the opposite effect, a "bend down", the string is pushed to a higher pitch before being plucked or picked and then allowed to fall to the lower, regular pitch after it is sounded. Though rare, some bassists may use a tremolo bar-equipped bass to produce the same effect.

In addition to pressing down one note at a time, bassists can also press down several notes at one time with their fretting hand to perform a double stop (two notes at once) or a chord. While double stops and chords are used less often by bassists than by electric guitarists playing rhythm guitar, a variety of double stops and chords can be performed on the electric bass. Some double stops used by bassists include octaves. Chords can be especially with effective on instruments with higher ranges such as six-string basses. Another variation to fully pressing down a string is to gently graze the string with the finger at the harmonic node points on the string, which creates chime-like upper partials (also called "overtones"). Glissando is an effect in which the fretting hand slides up or down the neck, which can be used to create a slide in pitch up or down. A subtle glissando can be performed by moving the fretting hand without plucking or picking the string; for a more pronounced effect, the string is plucked or picked first, or, in a metal or hardcore punk context, a pick may be scraped along the sides of the lower strings.

If you’re looking for more traditional hand drums, you can travel the world with our assortment of hand drums from all over the world. Djembes are rich-sounding, African drums that can produce a variety of tones. Check out our selection of doumbeks, Arabic drums, usually made of metal, that provide crisp, melodic cracks and pops. Hand drums and other handheld percussions, like tambourines and shakers, are great for impromptu jam sessions and for kids to learn basic rhythms. Our bongos are fun for reliving the glory of the beat poets of the 1950s, or for a foray into the lively musical traditions of salsa, son, or samba.

Popular music bands and rock groups use the bass guitar as a member of the rhythm section, which provides the chord sequence or "progression" and sets out the "beat" for the song. The rhythm section typically consists of a rhythm guitarist or electric keyboard player, or both, a bass guitarist and a drummer; larger groups may add additional guitarists, keyboardists, or percussionists.
Since there are so many digital pianos worthy of your attention in this catalog, you may want to narrow down your choices using some of the search options on the sidebar. For example, if you select stage digital pianos under the category section, you'll be presented with all the digital pianos that were made for the stage. Once here you have the opportunity to drill down even further and can search by topics like number of keys, MIDI/USB Connections or by whether or not the digital piano has built-in speakers.

What Are you Looking for?

Digital Piano Bass Guitar Drums
digital piano
bass guitar
piano bass guitar drums

We did the research for you so you won't have to!

All our recommended products have received at least 4.5 stars overall.

Click on any of the buttons above to check them out!