Piezoelectric pickups (also called "piezo" pickups) are non-magnetic pickups that use a transducer to convert vibrations in the instrument's body or bridge into an electrical signal. They are typically mounted under the bridge saddle or near the bridge and produce a different tone from magnetic pickups, often similar to that of an acoustic bass. Piezo pickups are often used in acoustic bass guitars to allow for amplification without a microphone.
At the heart of most stages is the acoustic drum set. It's made up of tom-toms, snares, at least one bass drum and an array of cymbals. You'll find all of those here, and there are choices for anyone. If you're just getting started as a drummer, you can get up and running fast with a shell pack or drum kit that gives you everything at once. Or, if you prefer, you can pick individual pieces ""a la carte"" to customize your own set from the ground up. The choice is yours.
For young children, parents are often inclined to start with a keyboard because they can be the least expensive. To decide whether or not this course of action is right for a young student, it’s good to have a conversation with that student’s music teacher. Often, music teachers would prefer that a child starts with a digital piano because they are going to have the requisite number of weighted keys and fewer distracting options. When a child learns to play on a keyboard, they may have a harder time adjusting to a digital or traditional piano. Music teachers also have preferences for which digital pianos they think are going to offer the best balance of sound and cost, and their experience with a particular instrument can certainly be helpful as your child learns. For these reasons, it’s always best to talk to a child’s music teacher before making a purchase. If your child has expressed an interest in learning to play the keyboard specifically, less expensive keyboards with fewer features can be a good place to start.
Cascio Interstate Music offers a huge selection of Drum & Percussion Gear - for the Beginner to the Professional Musician. We carry more than 20,000 Acoustic Drumsets & Electronic Drums, Cymbals, Latin Instruments, World Percussion, Ethnic Drums, Hardware, Drumsticks, Heads & Drummer accessories. We have the Largest Drum Catalog in the Country! Buy Drums & Accesories with Confidence at interstatemusic.com - Including DW, Pearl, Mapex, LP, Gretsch, Meinl, Paiste, Zildjian, Vic Firth, Remo, Roland & more! Don't forget to check out our Drum Outlet, New Products & Musical Instrument Rebates. Gift Cards, plastic or electronic, offer a choice for the musician in your life.
This guitar has got a maple C-shape neck with a 9.5-inch radius and 20 medium jumbo frets. Most bass playing occurs in the lower fret positions that make 20 frets ideal for bass playing. The single coil feature is quite simple to use and it will create both a bright and focused sound quality. If you are looking for a bass guitar that plays on a small scale, this is just the right one for you.
In the two-handed tapping styles, bassists use both hands to play notes on the fretboard by rapidly pressing and holding the string to the fret. Instead of plucking or picking the string to create a sound, in this technique, the action of striking the string against the fret or the fretboard creates the sound. Since two hands can be used to play on the fretboard, this makes it possible to play interweaving contrapuntal lines, to simultaneously play a bass line and a simple chord, or play chords and arpeggios. Bassist John Entwistle of The Who tapped percussively on the strings, causing them to strike the fretboard with a twangy sound to create drum-style fills. Players noted for this technique include Cliff Burton, Billy Sheehan, Stuart Hamm, John Myung, Victor Wooten, Les Claypool, Mark King, and Michael Manring. The Chapman Stick and Warr Guitars are string instruments specifically designed to play using two-handed tapping.
The hi-hat cymbals (nicknamed "hats") consist of two cymbals mounted facing each other on a metal pole with folding support legs that keep a hollow support cylinder standing up. Like the bass drum, the hi-hat has a foot pedal. The bottom cymbal is fixed in place. The top cymbal is mounted on a thin pole which is inserted into the hollow cymbal stand cylinder. The thin pole is connected to a foot pedal. When the foot pedal is pressed down, a mechanism causes the thin pole to move down, causing the cymbals to move together. When the foot is lifted off the pedal, the cymbals move apart, due to the pedal's spring-loaded mechanism. The hi-hats can be sounded by striking the cymbals with one or two sticks or just by opening and closing the cymbals with the footpedal, without striking the cymbals. The ability to create rhythms on the hi-hats with the foot alone enables drummers to use both sticks on other drums or cymbals. Different sounds can be created by striking "open hi-hats" (without the pedal depressed, which creates a noisy sound nicknamed "sloppy hats") or a crisp "closed hi-hats" sound (with the pedal pressed down). As well, the high hats can be played with a partially depressed pedal.
In 1918 Baby Dodds (Warren "Baby" Dodds, circa 1898–1959), playing on riverboats with Louis Armstrong on the Mississippi, was modifying the military marching set-up and experimenting with playing the drum rims instead of woodblocks, hitting cymbals with sticks (1919), which was not yet common, and adding a side cymbal above the bass drum, what became known as the ride cymbal. Drum maker William Ludwig developed the "sock" or early low-mounted high-hat after observing Dodd's drumming. Ludwig noticed that Dodd tapped his left foot all the time. Dodds had Ludwig raise the newly produced low hats 9 inches higher to make it easier to play, thus creating the modern hi-hat cymbal. Dodds was one of the first drummers to also play the broken-triplet beat that became the standard pulse and roll of modern ride cymbal playing. Dodds also popularized the use of Chinese cymbals.
Drum muffles are types of mutes that can reduce the ring, boomy overtone frequencies, or overall volume on a snare, bass, or tom. Controlling the ring is useful in studio or live settings when unwanted frequencies can clash with other instruments in the mix. There are internal and external muffling devices which rest on the inside or outside of the drumhead, respectively. Common types of mufflers include muffling rings, gels and duct tape, and improvised methods, such as placing a wallet near the edge of the head. Some drummers muffle the sound of a drum by putting a cloth over the drumhead.
Sabian CymbalsZildjian CymbalsCymbal PacksMeinl HCS Cymbal PackZildjian ZBT 3 Cymbal PackZildjian A20579 Custom 4-Piece Cymbal PackSabian AAX Limited Edition PackSee More Cymbal PacksChina CymbalsWuhan ChinaSee More China CymbalsCrash CymbalsSabian AAX X-PlosionSee More Crash CymbalsHi-Hat CymbalsZildjian A Custom Mastersound Hi-Hat CymbalsSee More Hi-Hat CymbalsRide CymbalsSabian AAX Raw Bell Dry Ride CymbalSee More Ride CymbalsSplash CymbalsSabian HHX Evolution SplashSee More Splash CymbalsSee All Cymbals
An LCD readout and a few more buttons on the control panel would go a long way toward making the keyboard’s options easier to use. The metronome function especially could be more user friendly. It has 10 speed presets, labeled 0-9, with a + and – for adjustment. These are selectable with the Function button and a key press. While practicing and deciding on tempo, most students find it more beneficial to know the exact BPM (beats per minute), which is impossible here using the built-in metronome.
A sizzler is a metal chain or combination of chains that is hung across a cymbal, creating a distinctive metallic sound when the cymbal is struck similar to that of a sizzle cymbal. Using a sizzler is the non-destructive alternative to drilling holes in a cymbal and putting metal rivets in the holes. Another benefit of using a "sizzler" chain is that the chain can be removed and the cymbal will return to its normal sound (in contrast, a cymbal with rivets would have to have the rivets removed). Some sizzlers feature pivoting arms that allow the chains to be quickly raised from the cymbal, or lowered onto it, allowing the effect to be used for some songs and removed for others.
The bass guitarist sometimes breaks out of the strict rhythm section role to perform bass breaks or bass solos. The types of bass lines used for bass breaks or bass solos vary by style. In a rock band, a bass break may consist of the bassist playing a riff or lick during a pause in the song. In some styles of metal, a bass break may consist of "shred guitar"-style tapping on the bass. In a funk or funk rock band, a bass solo may showcase the bassist's percussive slap and pop playing. In genres such as progressive rock, art rock, or progressive metal, the bass guitar player may play melody lines along with the lead guitar (or vocalist) and perform extended guitar solos.
Several colleges offer electric bass training in the US. The Bass Institute of Technology (BIT) in Los Angeles was founded in 1978, as part of the Musician's Institute. Chuck Rainey (electric bassist for Aretha Franklin and Marvin Gaye) was BIT's first director. BIT was one of the earliest professional training program for electric bassists. The program teaches a range of modern styles, including funk, rock, jazz, Latin, and R&B.
Just like the acoustic instruments they're derived from, digital pianos come in different sizes. They also offer dozens of options for your perusal, so you can weigh all kinds of factors to find the right model for you. For instance, if you're looking to pack a lot of piano into as small a space as possible, consider instruments such as the Williams Allegro 88-Key Digital Piano or the Casio CDP-120. These are fairly compact pianos, but that doesn't limit the breadth of their samples and sound settings.