Some drummers arrive at the venue with their drum kit and use the mics and mic stands provided by the venue's sound engineer. Other drummers bring their all of their own mics, or selected mics (e.g., a good quality bass drum mic and a good mic for the snare) to ensure that they have good quality mics for each show. In bars and nightclubs, the microphones supplied by the venue can sometimes be in substandard condition, due to the heavy use they experience.
I then set out to a few local Los Angeles music stores to get my hands on some keys, talk to the store employees who work around these instruments every day, and start to whittle down the list. After contacting manufacturers to request samples and/or to get suggestions on pianos that might better fit our guidelines (or, in one case, to inform us of a model that was being discontinued), the list was narrowed down to seven keyboards.
However, with the technological advances, recent digital pianos are mostly capable of recreating string resonances, reverberations and other acoustical effects via digital signal processing (DSP) and modeling technology. One example is the Casio Privia, which is able to generate such acoustical effects by means of a simple DSP, which is far less complex than physical modeling.
The next thing that you need to consider is whether the bass guitar has frets or not. Having bass guitar with frets makes it quite easier to play and one will be able to produce a more consistent tone. The advantage of going with a fretless bass is that it will produce a more unique sound. It is also best to produce the vibrato effect that you hear often in the popular musical styles like Funk and Jazz. As a beginner, you can start out with a bass with frets.
The number of frets installed on a bass guitar neck may vary. The original Fender basses had 20 frets, and most bass guitars have between 20 and 24 frets or fret positions. Instruments with between 24 and 36 frets (2 and 3 octaves) also exist. Instruments with more frets are used by bassists who play bass solos, as more frets gives them additional upper range notes. When a bass has a large number of frets, such as a 36 fret instrument, the bass may have a deeper "cutaway" to enable the performer to reach the higher pitches. Like electric guitars, fretted basses typically have markers on the fingerboard and on the side of the neck to assist the player in determining where notes and important harmonic points are. The markers indicate the 3rd, 5th, 7th, 9th fret and 12th fret (the 12th fret being the octave of the open string) and on the octave-up equivalents of the 3rd fret and as many additional positions as an instrument has frets for. Typically, one marker is on the 3rd, 5th, 7th and 9th fret positions and two markers on the 12th fret.
As the music of the world was evolving, so was the drum set. Tom-tom drums, small crash cymbals, Chinese cymbals and hi-hat cymbals were added to the drum set. The hi-hats were the primary way for the drummers of the big band era to keep time. Before 1930, while playing the New Orleans jazz and Chicago styles, drummers would choke the cymbals on the "ands" of eighth note figures as an alternative to playing a buzz roll, the rim of the drums, or on the woodblocks to keep time. This muting method of keeping time by choking the crash and china cymbals proved to be awkward, so the drummers of that time came up with the idea of having a foot-operated cymbal. This resulted in the creation of the snowshoe cymbal, a foot-operated cymbal. It enabled drummers to play the eighth note figures between the right and left foot, improving the ergonomics and facility of drumset playing and helping drummers to keep a more steady rhythm.
When playing bass solos, rock and metal bassists sometimes use effects such as fuzz bass or a wah-wah pedal to produce a more pronounced sound. Notably, Cliff Burton of Metallica used both effects. Due to the lower range of the bass, bass guitar solos usually have a much lighter accompaniment than solos for other instruments. In some cases, the bass guitar solo is unaccompanied, or accompanied only by the drums.
In some styles or settings, such as country music clubs or churches, small venues, or when a live recording is being made, the drummer may use a transparent perspex or plexiglas drum screen (also known as a drum shield) to dampen the onstage volume of the drums. A screen that completely surrounds the drum kit is known as a drum booth. In live sound applications, drum shields are used so that the audio engineer can have more control over the volume of drums that the audience hears through the PA system mix or to reduce the overall volume of the drums, as a way to reduce the overall volume of the band in the venue. In some recording studios, foam and fabric baffles are used in addition to or in place of clear panels. The drawback with foam/cloth baffle panels is that the drummer cannot see other performers, the record producer or the audio engineer well.
The bass guitars will have either 4, 5 or 6 strings. Though it may be tempting to go for the guitar with 6 strings, going for the 4-stringed is good for a new player. A bass guitar is a type of stringed instrument that plays a lower tone and sounds more impressive than a regular guitar. The most notable difference is that a bass guitar may have as few as four strings and they are much thicker. The thicker strings are what give the bass its low tone.
Tapewound (double bass type) and flatwound strings are sometimes used with the fretless bass so the metal string windings do not wear down the fingerboard. Tapewound and flatwound strings have a distinctive tone and sound. Some fretless basses have epoxy-coated fingerboards, or fingerboards made of an epoxy composite like micarta, to increase the fingerboard's durability, enhance sustain, and give a brighter tone.
For the lion's share of rock and pop music, you're looking at a classic drum set: tom-toms, snares, bass and cymbals. You'll find a huge selection of these staple instruments here, in as many varieties as you could name. If you're just starting out with the drums, take a look at shell packs and drum sets to get up and running in a hurry. On the other hand, if you're a veteran drummer, chances are that you'd prefer to pick and choose your instruments individually and only the best holders for your sticks will do. For the adventurous among us, there are electronic drum sets, which open up the unlimited potential of customized samples. Whatever you want to do to distinguish yourself from other drummers, this is where you can find the instruments to get there.
In the 1930s, musician and inventor Paul Tutmarc of Seattle, Washington, developed the first electric string bass in its modern form, a fretted instrument designed to be played horizontally. The 1935 sales catalog for Tutmarc's electronic musical instrument company, Audiovox, featured his "Model 736 Bass Fiddle", a four-stringed, solid-bodied, fretted electric bass instrument with a 30 1⁄2-inch (775-millimetre) scale length. The adoption of a guitar's body shape made the instrument easier to hold and transport than any of the existing stringed bass instruments. The addition of frets enabled bassists to play in tune more easily than on fretless acoustic or electric upright basses. Around 100 of these instruments were made during this period.
Other design options include finishes, such as lacquer, wax and oil; flat and carved designs; luthier-produced custom-designed instruments; headless basses, which have tuning machines in the bridge of the instrument (e.g., Steinberger and Hohner designs) and several artificial materials such as luthite. The use of artificial materials (e.g., BassLab) allows for unique production techniques such as die-casting, to produce complex body shapes. While most basses have solid bodies, they can also include hollow chambers to increase the resonance or reduce the weight of the instrument. Some basses are built with entirely hollow bodies, which change the tone and resonance of the instrument. Acoustic bass guitars have a hollow wooden body constructed similarly to an acoustic guitar, and are typically equipped with piezoelectric or magnetic pickups and amplified.
The guitar gives you a vintage tone that is delivered by the 3 custom Jaguar single-coil pickups with notched claw shielding rings. Single coils have been around for long and are quite simple. They give you a bright and focused sound. This is truly a unique bass guitar that known as baritone guitar too. You will surely fall in love with the music of the guitar that provided with gritty and low tone sound. It has updated its baritone classics also.
Although there are far fewer university programs that offer electric bass instruction in jazz and popular music, some universities offer bachelor's degrees (B.Mus.) and Master of Music (M.Mus.) degrees in jazz performance or "commercial music", where electric bass can be the main instrument. In the US, the Manhattan School of Music has a jazz program leading to B.Mus. and M.Mus degrees that accepts students who play bass (double bass and electric bass), guitar, piano, drums, and melody instruments (e.g., saxophone, trumpet, etc.).
Another design consideration for the bass is whether to use frets on the fingerboard. On a fretted bass, the metal frets divide the fingerboard into semitone divisions (as on an electric guitar or acoustic guitar). Fretless basses have a distinct sound, because the absence of frets means that the string must be pressed down directly onto the wood of the fingerboard with the fingers, as with the double bass. The string buzzes against the wood and is somewhat muted because the sounding portion of the string is in direct contact with the flesh of the player's finger. The fretless bass lets players use expressive approaches such as glissando (sliding up or down in pitch, with all of the pitches in between sounding), and vibrato (in which the player rocks a finger that is stopping a string to oscillate the pitch slightly). Fretless players can also play microtones, or temperaments other than equal temperament, such as just intonation.